SINGLE-PHASE BRIDGE RECTIFIER
KBPC35005 THRU KBPC3510
MB3505 THRU MB3510
This series is UL recognized
· High forward surge current capability
Integrally molded heatsink provide
very low thermal resistance.
· High isolation voltage from case to lugs.
High temperature soldering guaranteed:
260°C/10 second, at 5 lbs. (2.3kg) tension.
50 to 1000 Volts
Case: Metal case
Terminal: Plated 0.25" (6.35mm) lug.
Polarity: Polarity symbols marked on case.
Mounting: Thru hole for #10 screw, 20 in,- lbs. Torqute Max.
Weight: 1.02 ounce, 29gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%
KBPC KBPC KBPC KBPC KBPC KBPC KBPC
SYMBOLS 35005 3501 3502 3504 3506 3508 3510 UNIT
MB3505 MB351 MB352 MB354 MB356 MB358 MB3510
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Output
Current, at TC = 50 (Note 1,2)
Peak Forward Surge Current
8.3ms single half sine - wave superimposed on
rated load (JEDEC method )
Rating for Fusing (t<8.3ms)
Maximum Instantaneous Forward Voltage Drop
per bridge element at 17.5A
Maximum DC Reverse Current at rated TA = 25
DC blocking voltage per element
Isolation Voltage from case to lugs.
Typical Thermal Resistance (Note 1,2)
Operating Temperature Range
Storage Temperature Range
(-65 to +150)
(-65 to +150)
1. Unit mounted on 9" X 3.5" X 4.6" (23cm X 9cm X 11.8cm)Al. finned Plate.
2. Bolt down on heat-sink with silicon thermal compound between bridge and mounting sutfae for maximum heat
transfer efficiency with # 10 screw.