MBS034M Datasheet | MOBISENSE SYSTEMS

MOBISENSE SYSTEMS ® Aptina™ MT9V034 camera module WVGA (752 x 480) CMOS image sensor Wide dynamic range up to 110d B Global shutter True SNAP™ Context switching Monochorme or Color Low power, small size, low weight M12x0.5 lens mount Actual size 26 x 20mm (1 x 0.8”) MBS034M/C Digital parallel interface with FFC 30 pins General description MBS034M/C camera modules include Aptina™’s latest sensors for automotive and surveillance applications featuring Digital Clarity® CMOS imaging technology Aptina’s breakthrough low-noise CMOS imaging technology that achieves CCD image quality (based on signal-to-noise ratio and low-light sensitivity) while maintaining the inherent size, cost and integration advantages of CMOS. Key specifications MT9V034 Sensor Optical format 1/3-inch Active imager size 4.51mm(H) x 2.88mm(V) 5.35mm diagonal Active pixels 752H x 480V Pixel size 6.0 x 6.0µm Color filter array Monochrome or color RGB Bayer pattern Shutter type True SNAP™ Global shutter Maximum data 27 Mp/s rate master clock 27 MHz Full resolution 752 x 480 Frame rate 60 fps (at full resolution) ADC resolution 10-bit column-parallel Responsivity 4.8 V/lux-sec (550nm) Dynamic range >55d B linear; >110d B in HDR mode Operating - 30° C to +70° C ambient temperature MT9V034 sensor Features - - - - - - - - - - Wide dynamic range Real-time exposure context-switching; dual register True SNAP™ global shutter with simultaneous integrate and readout Monochrome or RGB Bayer color filters available Enhanced near-IR performance Programmable to any window size: QVGA, CIF, QCIF, etc. Progressive or interlaced readout modes 2x2 and 4x4 binning at full resolution Simple two-wire serial interface Automatic and programmable functions: regionally weighted exposure, black level offset correction, horizontal blanking, vertical blanking, lighting control, windowing, left-right and top-bottom image reversal, regional gain, image decimation, manual or automatic high dynamic. Parallel output, power and I2C on FFC...