Datasheet4U Logo Datasheet4U.com

MP2303A - Synchronous Rectified Step-Down Converter

General Description

The MP2303A is a monolithic synchronous buck regulator.

current over a wide operating input voltage of 4.7V to 28V.

Key Features

  • 3A Output Current.
  • Wide 4.7V to 28V Operating Input Range.
  • Integrated MOSFET Switches.
  • Output Adjustable from 0.80V to 25V.
  • Up to 95% Efficiency.
  • Programmable Soft-Start.
  • Stable with Low ESR Ceramic Output Capacitors.
  • Fixed 360kHz Frequency.
  • Cycle-by-Cycle Over Current Protection.
  • Input Under Voltage Lockout.
  • Available in thermally enhanced 8-Pin SOIC and PDIP-8 packages.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MP230 POWER OPERATIONAL AMPLIFIER Apex Microtechnology
MP2305K3TC0 Safety Standard Capacitor ETC
MP2307 Step-Down Converter Kexin
MP2332K3C10 Safety Standard Capacitor ETC
MP2333K3C20 Safety Standard Capacitor ETC

Other Datasheets by Monolithic Power Systems

Part Number Description
MP2303ADN Synchronous Rectified Step-Down Converter
MP2303ADP Synchronous Rectified Step-Down Converter
MP2303 340KHz Synchronous Rectified Step-Down Converter
MP2303DN 340KHz Synchronous Rectified Step-Down Converter
MP2303DQ 340KHz Synchronous Rectified Step-Down Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MP2303A 3A, 28V, 360kHz Synchronous Rectified Step-Down Converter The Future of Analog IC Technology R DESCRIPTION The MP2303A is a monolithic synchronous buck regulator. The device integrates a 150mΩ O high-side MOSFET and a 80mΩ low-side F MOSFET that provide 3A continuous load current over a wide operating input voltage of 4.7V to 28V. Current mode control provides fast D transient response and cycle-by-cycle current limit. E An adjustable soft-start prevents inrush current at turn-on. In shutdown mode, the supply D current drops to lower than 1μA. N S 8 This device, available in an 8-pin SOIC and PDIP-8 packages, provides a very compact E N 3 system solution with minimal reliance on MM SIG P23 external components. FEATURES  3A Output Current  Wide 4.