MP2410 Datasheet | Monolithic Power Systems

DESCRIPTION The MP2410 is a 24V, monolithic, synchronous, step-down, white LED driver with a built-in power MOSFET and rectifier. It achieves up to 2A of continuous output current with excellent load and line regulation. Peak current mode operation provides fast transient response and eases loop stabilization. The MP2410 implements deep analog dimming. Full protection features include cycle-by-cycle peak-current limiting, output short-circuit protection (SCP), open LED protection, NTC thermal protection, and thermal shutdown. The MP2410 requires a minimum number of readily available, standard, external ponents and is available in TSOT23-6 and TSOT23-8 packages. 24V, 2A, 1MHz, Synchronous, Step-Down LED Driver FEATURES - 4.2V to 24V Wide Input Range - Synchronous Step-Down Converter - 100mΩ Internal High-Side Power MOSFET - 80mΩ Internal Low-Side Synchronous Rectifier - Peak Current Mode Control - Up to 2A Continuous Output Current - 100m V Feedback Voltage - Up to 97% Efficiency - Fixed 1MHz Switching Frequency - Analog Dimming - Cycle-by-Cycle Current Limit - Inherent LED Open Protection - Output Short-Circuit Protection (SCP) - NTC Thermal Protection - Thermal Shutdown - Auto-Restart Function - Available in TSOT23-6 and TSOT23-8 Packages APPLICATIONS - Infrared LED Driver - General LED Driver - Flashlight - Handheld puters Backlight All MPS parts are lead-free, halogen-free, and adhere to the Ro HS directive. For MPS green status, please visit the MPS website under Quality Assurance. “MPS” and “The Future of Analog IC Technology” are registered trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION VIN C1 OFF ON MP2410 SW EN/DIM GND FB C2 L1...