MP24895GJ Datasheet | Monolithic Power Systems

The Future of Analog IC Technology DESCRIPTION The MP24895 is step-down LED driver, which is designed in continuous current mode for driving the high-brightness LEDs from a wide input voltage of 6V to 36V. The MP24895 employs a hysteretic control scheme to regulate LED current. Moreover, the control scheme provides optimal loop stabilization and a very quick response time. For a high accuracy, the MP24895 senses LED current by an external high-side resistor. Its low 100m V average feedback voltage reduces power loss and improves the efficiency. The MP24895 implements PWM and analog dimming together on the EN/DIM pin. The MP24895 includes under-voltage lockout,t and thermal overload protection to prevent damage in the event of an output overload. The MP24895 is available in TSOT23-5 and QFN-6 packages. TYPICAL APPLICATION MP24895 Step-down White-LED Driver Wide 6-36V Input Voltage Features - Internal 36V MOSFET - Wide 6V-to-36V Input Range - 1A Output Current - High Efficiency - Hysteretic Control - PWM and Analog Dimming - 1000:1 PWM Dimming Resolution - UVLO, Thermal Shutdown - Available in TSOT23-5 and Packages QFN-6 APPLICATIONS - Low-Voltage Halogen Replacement - Low-Voltage General Illumination - Automotive/Decorative LED Lighting - Signs/Emergency Lighting - LED Backlighting All MPS parts are lead-free and adhere to the Ro HS directive. For MPS green status, please visit MPS website under Products, Quality Assurance page. “MPS” and “The Future of Analog IC Technology” are registered trademarks of Monolithic Power Systems,...