MP2696B
MP2696B is Single-Cell Switching Charger manufactured by Monolithic Power Systems.
DESCRIPTION
The MP2696B is a highly integrated, flexible, switch-mode, battery-charging, power-path management device designed for a single-cell Li-ion and Li-polymer battery. This device can be used in a wide range of portable applications.
The MP2696B integrates three battery-charging phases: pre-charge, constant current charge, and constant voltage charge. This device also manages the input power source through input current limit regulation and minimum input voltage regulation.
The MP2696B can switch to boost mode to generate the system power output from the battery.
The MP2696B has an integrated IN to SYS pass-through path to pass the input voltage to the system.
Using an I2C interface, the host can flexibly configure the charge and boost parameters. The device operating status can also be read in the registers.
Safety features include SYS short-circuit protection (SCP), input over-voltage protection (OVP), battery under-voltage protection (UVP), thermal shutdown, and JEITA battery temperature monitoring.
The MP2696B is available in a QFN-21 (3mmx3mm) package.
FEATURES
- 4.0V to 11V Operating Voltage Range
- Up to 16V Sustainable Input Voltage
- 500m A to 3.6A Configurable Charge
Current
- 3.6V to 4.45V Configurable Charge
Regulation Voltage with ±0.5% Accuracy
- 500m A to 3.5A Configurable Input Current
Limit with ±10% Accuracy
- Minimum Input Voltage Loop for Maximum
Adapter Power Tracking
- Ultra-Low 25μA Battery Discharge Current in Idle Mode
- Boost Converter with Up to 4.0A of Output
Current: o Configurable Output Current Limit Loop o Configurable Boost Output Voltage o USB Output Cable pensation o Configurable Inductor Peak Current
Limiting
- prehensive Safety Features
: o Fully Customizable JEITA Profile with Configurable Temperature Threshold o Charge Safety Timer o Input Over-Voltage Protection (OVP) o Thermal Shutdown o SYS Over-Current (OC) and Short-
Circuit Protection (SCP)
- Analog Voltage Output IB Pin for Battery
Current Monitoring
- SYS Plug-In...