Datasheet4U Logo Datasheet4U.com

MP2760 - 1-Cell to 4-Cell Buck-Boost Charger

Description

The MP2760 is a buck-boost charger for battery packs with 1 to 4 cells in series.

It accepts a wide 4V to 22V input voltage (VIN) range to charge the battery.

The battery voltage can be above or below VIN due to the buck-boost topology.

Features

  • include charge termination and automatic recharge. The MP2760 integrates the input current (IIN) limit and VIN limit to avoid overloading the input power source. This is compliant with USB PD specifications. The MP2760 provides narrow-voltage DC (NVDC) power path management. A battery FET (BATFET) controls an external N-channel MOSFET to regulate the system’s minimum voltage and provide a battery supplement function. The device can also supply a wide 4V to 21V voltage range at the IN pin when so.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MP270 Low Cost Quartz Crystal CTS
MP270-E Low Cost Quartz Crystal CTS
MP270B Low Cost Quartz Crystal CTS
MP270B-E Low Cost Quartz Crystal CTS
MP2-202S Fast Recovery Diode Sanken

Other Datasheets by Monolithic Power Systems

Part Number Description
MP2762A I2C-Controlled 6A Buck or Boost Charger
MP2700 1A Linear Charger
MP2702 1A Linear Charger
MP2710 Li-Ion Battery Charger
MP2720A Buck Charger

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MP2760 I2C-Controlled, 1-Cell to 4-Cell Buck-Boost Charger with NVDC Power Path Management DESCRIPTION The MP2760 is a buck-boost charger for battery packs with 1 to 4 cells in series. It accepts a wide 4V to 22V input voltage (VIN) range to charge the battery. The battery voltage can be above or below VIN due to the buck-boost topology. When the input is present, the MP2760 operates in charge mode. The device measures the battery voltage and charges the battery with four phases: constant current trickle charge, constant current pre-charge, constant current fast charge, and constant voltage charge. Additional features include charge termination and automatic recharge. The MP2760 integrates the input current (IIN) limit and VIN limit to avoid overloading the input power source.
Datasheet originally released: |