Datasheet4U Logo Datasheet4U.com

MP2888A - Multi-Phase PWM Controller

General Description

The MP2888A is a digital, multi-phase, pulsewidth modulation (PWM) controller with digital PWM-VID interface compatible with NVIDIA’s Open VReg specification.

Key Features

  • Programmable Multi-Phase up to 10 Phases.
  • PWM-VID Interface Compatible with NVIDIA Open VReg Specification.
  • PMBus/I2C Compliant (1MHz Bus Speed).
  • Pin Programmable for PMBus Address.
  • Built-In EEPROM to Store Custom Configurations.
  • Switching Frequency Range 200kHz to 5MHz.
  • Automatic Loop Compensation.
  • Fewer External Components than Conventional Analog Controller.
  • Best Transient Performance with Non- Linear Digital Control.
  • Flexible Phase Assignmen.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MP2800 General Purpose Schottky Diodes M-Pulse Microwave
MP2801 General Purpose Schottky Diodes M-Pulse Microwave
MP2810 General Purpose Schottky Diodes M-Pulse Microwave
MP28100BT MP28100BT ETC
MP2811 General Purpose Schottky Diodes M-Pulse Microwave

Other Datasheets by Monolithic Power Systems

Part Number Description
MP2888AGU Multi-Phase PWM Controller
MP2884A Multi-Phase PWM Controller
MP2884AGU Multi-Phase PWM Controller
MP2886A Multi-Phase PWM Controller
MP28114 600mA Low-Voltage Synchronous Step-Down Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
The Future of Analog IC Technology DESCRIPTION The MP2888A is a digital, multi-phase, pulsewidth modulation (PWM) controller with digital PWM-VID interface compatible with NVIDIA’s Open VReg specification. The MP2888A can work with MPS’s Intelli-Phase products to complete the multi-phase voltage regulator (VR) solution with minimal external components. The MP2888A can be configured with up to 10phase operation. The MP2888A provides an on-chip EEPROM to store and restore device configurations. Device configurations and fault parameters can be easily programmed or monitored via the PMBus/I2C interface. The MP2888A can monitor and report the output current through the CS output from the Intelli-Phase products.