Datasheet4U Logo Datasheet4U.com

MP3306 - 700kHz Synchronous Step-Up White LED Driver

General Description

The MP3306 is a step-up converter designed for driving white LEDs from 3V to 12V power supply.

The MP3306 uses current mode, fixed frequency architecture to regulate the LED current, which is measured through an external high-side current sense resistor.

Key Features

  • 3V~12V Input Voltage.
  • Analog Dimming and PWM Dimming.
  • Output-to-Input Disconnect in Shutdown Mode.
  • Programmable Open Load Shutdown.
  • Output Short Protection.
  • Low 202mV Feedback Voltage with +/-3% accuracy.
  • UVLO, Thermal Shutdown.
  • Available in 2mm x 2mm QFN12 Package.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MP330 (MP312 / MP330) Power Film Resistors Caddock
MP30 Power Rheostats Vishay Siliconix
MP3005 Current and Voltage Controls Current Transformer Carlo Gavazzi
MP312 (MP312 / MP330) Power Film Resistors Caddock
MP320A Low Cost Quartz Crystal CTS

Other Datasheets by Monolithic Power Systems

Part Number Description
MP3301 Fixed-Frequency Step-Up Driver
MP3301GJ Fixed-Frequency Step-Up Driver
MP3305 36V 1.3A Step-up White LED Driver
MP3308 Step-up White LED Driver
MP3309 White LED Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MP3306 30V, 700kHz Synchronous Step-Up White LED Driver DESCRIPTION The MP3306 is a step-up converter designed for driving white LEDs from 3V to 12V power supply. The MP3306 uses current mode, fixed frequency architecture to regulate the LED current, which is measured through an external high-side current sense resistor. The low 202mV feedback voltage and synchronous rectification reduces power loss and improves efficiency. The MP3306 is turned off if an over-voltage condition is present due to an open circuit condition. The output disconnect feature allows the output to be completely discharged. The MP3306 includes under-voltage lockout, current limiting, output short protection and thermal overload protection. The MP3306 is available in small 12-pin QFN (2mm x 2mm) package.