Datasheet4U Logo Datasheet4U.com

MP3310N - White LED Driver

Description

The MP3310N is a monolithic step-up converter designed for driving arrays of WLEDs from a wide input supply range.

The MP3310N uses current mode, fixed frequency architecture to regulate the LED current to user programmed value set by an external current setting resistor.

Features

  • true PWM dimming, which allows the flexible control of the backlighting luminance under wide range of the ambient brightness. The MP3310N is turned off if an over-voltage condition is present due to an open circuit condition. Use one external resistor voltage divider to program OVP threshold. The MP3310N also includes under-voltage lockout, current limiting and thermal overload protection preventing damage in the event of an output overload. The MP3310N is available in small 10-pin QFN 3x3mm pac.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MP330 (MP312 / MP330) Power Film Resistors Caddock
MP30 Power Rheostats Vishay Siliconix
MP3005 Current and Voltage Controls Current Transformer Carlo Gavazzi
MP312 (MP312 / MP330) Power Film Resistors Caddock
MP320A Low Cost Quartz Crystal CTS

Other Datasheets by Monolithic Power Systems

Part Number Description
MP3310 White LED Driver
MP3312 Dual-Channel White LED Driver
MP3314 Boost White LED Driver
MP3301 Fixed-Frequency Step-Up Driver
MP3301GJ Fixed-Frequency Step-Up Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MP3310N 47V, 1.3A, Step-up White LED Driver with True PWM Dimming DESCRIPTION The MP3310N is a monolithic step-up converter designed for driving arrays of WLEDs from a wide input supply range. The MP3310N uses current mode, fixed frequency architecture to regulate the LED current to user programmed value set by an external current setting resistor. The switching frequency is also programmable with an external resistor. The MP3310N features true PWM dimming, which allows the flexible control of the backlighting luminance under wide range of the ambient brightness. The MP3310N is turned off if an over-voltage condition is present due to an open circuit condition. Use one external resistor voltage divider to program OVP threshold.
Published: |