Datasheet4U Logo Datasheet4U.com

MP5010 - Programmable Current Limit Switch

General Description

The MP5010 is a protection device designed to protect circuitry on the output (source) from transients on input (VCC).

It also protects VCC from undesired shorts and transients coming from the source.

At start up, inrush current is limited by limiting the slew rate at the source.

Key Features

  • Integrated 44mΩ Power FET.
  • Enable/Fault Pin.
  • Adjustable Slew Rate for Output Voltage.
  • Adjustable Current Limit.
  • Thermal Protection.
  • Over Voltage Limit.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MP5010 50 Amp Single Phase Bridge Rectifier Micro Commercial Components
MP5010M High Current Glass Passivated Molding Single-Phase Bridge Rectifier Leshan Radio Company
MP5010W Single Phase Bridge Rectifier MCC
MP501 PRESS-FIT MOTOLOLA DIODES Shunye
MP501M High Current Glass Passivated Molding Single-Phase Bridge Rectifier Leshan Radio Company

Other Datasheets by Monolithic Power Systems

Part Number Description
MP5010DQ Programmable Current Limit Switch
MP5013A 5A Programmable Current-Limit Switch
MP5013E Programmable Current-Limit Switch
MP5014A Programmable Current-Limit Switch
MP5014AGJ Programmable Current-Limit Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
The Future of Analog IC Technology MP5010 5V, 1A- 5A Programmable Current Limit Switch DESCRIPTION The MP5010 is a protection device designed to protect circuitry on the output (source) from transients on input (VCC). It also protects VCC from undesired shorts and transients coming from the source. At start up, inrush current is limited by limiting the slew rate at the source. The slew rate is controlled by a small capacitor at the dv/dt pin. The dv/dt pin has an internal circuit that allows the customer to float this pin (no connect) and still receive 1.1ms ramp time at the source. The max load at the output (source) is current limited. This is accomplished by utilizing a sense FET topology.