The Future of Analog IC Technology
The MP600 2 is a mon olithic Flyba ck/Forward
DC-DC converter which includes a 150V power
switch and is capable of delivering up to 30W
output power. It can also be used for boost and
The MP6002 uses the fixed-frequency peak
current mode primary c ontroller architecture. It
has an in ternal soft- start, auto- retry, and
incorporates over current, short circuit, an d
over-voltage protection. The MP600 2 can also
skip cycles to maintain zero load regulation.
It has a d irect optocoupler inter face which
bypasses the internal error amplifier when an
isolated output is desired.
The MP6002 is ideal for telecom applications,
and is av ailable in a compact, thermally
enhanced SO8 package with an exposed pad.
Integrated 0.45Ω 150V Power Switch
Cycle-by-Cycle Current Limiting
Programmable Switching Frequency
Duty Cycle Limiting with Line Feed Forward
Integrated 100V Startup Circuit
Internal Slope Compensation
Line Under Voltage Lockout
Line Over Voltage Protection
Auto-Restart for Opened/Shorted Output
Zero Load Regulation
VoIP Phones, Power over Ethernet (PoE)
Distributed Power Conversion
All MPS parts are lead-free and adhere to the RoHS directive. For MPS green
status, please visit MPS website under Products, Quality Assurance page.
“MPS” and “The Future of Analog IC Technology” are registered trademarks of
Monolithic Power Systems, Inc.
2.2μ F x 2
5V @ 3A
Efficiency vs Load Current
0 0.5 1 1.5 2 2.5 3 3.5
LOAD CURRENT (A)
MP6002 Rev. 1.0
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2013 MPS. All Rights Reserved.