MP6500 Datasheet | Monolithic Power Systems

DESCRIPTION The MP6500 is a stepper motor driver with a built-in translator and current regulation. Current sensing is internal and requires no external sense resistors. High integration and a small package size make the MP6500 a spacesaving and cost-effective solution for bipolar stepper motor drives. The MP6500 operates from a supply voltage of up to 35V and can deliver motor currents up to 2.5A (depending on PCB design and thermal conditions). The MP6500 can operate a bipolar stepper motor in full-, half-, quarter-, or eighthstep modes. Internal safety features include over-current protection (OCP), input overvoltage protection (OVP), under-voltage lockout (UVLO), and thermal shutdown. The MP6500 is available in QFN-24 (5mmx5mm) and TSSOP-28 EP packages. FEATURES - Wide 4.5V to 35V Input Voltage Range - Two Internal Full-Bridge Drivers - Internal Current Sensing and Regulation - Low On Resistance (HS: 195mΩ, LS: 170mΩ) - No Control Power Supply Required - Simple Logic Interface - 3.3V and 5V patible Logic Supply - Step Modes from Full-Step to Eighth-Step - 2.5A Output Current - Automatic Current Decay - Over-Current Protection (OCP) - Input Over-Voltage Protection (OVP) - Thermal Shutdown and Under-Voltage Lockout (UVLO) Protection - Fault Indication Output - Available in QFN-24 (5mmx5mm) and Thermally Enhanced TSSOP-28 Packages APPLICATIONS - Bipolar Stepper Motors - Printers All MPS parts are lead-free, halogen-free, and adhere to the Ro HS directive. For MPS green status, please visit the MPS website under Quality Assurance. “MPS” and “The Future of Analog IC Technology” are registered trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION MP6500 CPA n FAULT 100n F STEP µC n ENBL MS1 MS2 1µF...