Datasheet4U Logo Datasheet4U.com

MP6604B - Simple Dual H-Bridge Driver

General Description

The MP6604B is a dual H-bridge motor driver IC designed to drive stepper motors, brushed DC motors, and other loads.

The MP6604B operates across a 4.5V to 45V input voltage (VIN) range.

It can deliver an output current up to 2.5A per phase, depending on the ambient temperature (TA) and PCB layout.

Key Features

  • include over-current protection (OCP), input overvoltage protection (OVP), input under-voltage lockout (UVLO), and thermal shutdown. The MP6604B has PHASE, ENBL, BRAKE, and BMOD input signals for each H-bridge. The MP6604B is available in QFN-28 (4mmx5mm) and TSSOP-28EP packages.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MP6 AC-DC / Configurable Emerson
MP60-E PENTIUM PRO PROCESSOR VOLTAGE REGULATOR MODULE Semtech Corporation
MP60-F KLAMATH PROCESSOR VOLTAGE REGULATOR MODULE Semtech Corporation
MP6005 SINGLE-PHASE SILICON BRIDGE RECTIFIER Dc Components
MP601 SINGLE-PHASE SILICON BRIDGE RECTIFIER Dc Components

Other Datasheets by Monolithic Power Systems

Part Number Description
MP6604A Dual H-Bridge Motor Driver
MP6604C Simple Dual H-Bridge Driver
MP6600 Stepper Motor Driver
MP6600GR Stepper Motor Driver
MP6600L 1.5A Stepper Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MP6604B 4.5V to 45V, 2.5A, Simple Dual H-Bridge Driver (PHASE/EN) DESCRIPTION The MP6604B is a dual H-bridge motor driver IC designed to drive stepper motors, brushed DC motors, and other loads. The MP6604B operates across a 4.5V to 45V input voltage (VIN) range. It can deliver an output current up to 2.5A per phase, depending on the ambient temperature (TA) and PCB layout. Internal safety and diagnostic features include over-current protection (OCP), input overvoltage protection (OVP), input under-voltage lockout (UVLO), and thermal shutdown. The MP6604B has PHASE, ENBL, BRAKE, and BMOD input signals for each H-bridge. The MP6604B is available in QFN-28 (4mmx5mm) and TSSOP-28EP packages. FEATURES • 4.5V to 45V Operating Input Voltage (VIN) Range • 2.