MP6605C
MP6605C is 4-Channel Low-Side Driver manufactured by Monolithic Power Systems.
DESCRIPTION
The MP6605C is a 4-channel, low-side driver IC with an I2C interface. The device integrates lowside MOSFET (LS-FET) switches and high-side clamp diodes to drive inductive loads. It is typically used for unipolar stepper motors and solenoid drivers.
The MP6605C operates from a supply voltage of up to 60V, and can deliver an output current (IOUT) up to 1.5A, depending on the PCB design and thermal conditions. The maximum voltage on the motor driver’s output pins is 60V.
Internal safety features include over-current protection (OCP), under-voltage lockout (UVLO), and over-temperature protection (OTP).
The MP6605C is available in a QFN-24 (4mmx4mm) package.
4-Channel, Low-Side Driver with I2C Interface
FEATURES
- Wide 4.5V to 60V Input Voltage (VIN) Range
- 60V Maximum Winding Clamp Voltage
- Four Low-Side MOSFETs (LS-FETs) and
Clamp Diodes
- 350mΩ MOSFET On Resistance
- 1.5A (One Channel On) or 700m A (Four
Channels On) Maximum Output Current (IOUT)
- Over-Current Protection (OCP)
- Under-Voltage Lockout Protection (UVLO)
- Over-Temperature Protection (OTP)
- Fault Indication Output
- No Control Power Supply Required
- I2C Interface
- 3.3V and 5V patible Logic Supply
- Available in a QFN-24 (4mmx4mm) Package
APPLICATIONS
- Unipolar Stepper Motors
- Solenoid Drivers
All MPS parts are lead-free, halogen-free, and adhere to the Ro HS directive. For MPS green status, please visit the MPS website under Quality Assurance. “MPS”, the MPS logo, and “Simple, Easy Solutions” are registered trademarks of Monolithic Power Systems, Inc. or its subsidiaries.
MP6605C Rev. 1.0
Monolithic Power.
7/11/2022
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2022 MPS. All Rights Reserved.
- 4-CHANNEL LOW-SIDE DRIVER WITH I2C INTERFACE
TYPICAL APPLICATION
VIN n ENBL
VIN n...
