Datasheet4U Logo Datasheet4U.com

MP6632 - Three-Phase BLDC Motor Driver

Description

The MP6632 is a three-phase brushless DC (BLDC) motor driver controller with up to 1A of driving current.

It drives three-phase BLDC motors, with a 6V to 50V input voltage (VIN) range.

Features

  • a built-in, configurable speed curve function. It also features a sinusoidal drive for maximum torque, as well as low speed ripple and noise across the full speed range. The MP6632 provides rotational speed detection. The rotational speed detector (the FG/RD pin) is an open-drain output. It outputs a high or low voltage relative to the Hall comparator’s output. Direction control is achieved via the DIR pin’s input. Rich protections include under-voltage lockout (UVLO), locked-rotor protection, o.

📥 Download Datasheet

Datasheet preview – MP6632

Datasheet Details

Part number MP6632
Manufacturer MPS
File Size 852.05 KB
Description Three-Phase BLDC Motor Driver
Datasheet download datasheet MP6632 Datasheet
Additional preview pages of the MP6632 datasheet.

📁 Similar Datasheet

  • MP6 - AC-DC / Configurable (Emerson)
  • MP60-E - PENTIUM PRO PROCESSOR VOLTAGE REGULATOR MODULE (Semtech Corporation)
  • MP60-F - KLAMATH PROCESSOR VOLTAGE REGULATOR MODULE (Semtech Corporation)
  • MP6005 - SINGLE-PHASE SILICON BRIDGE RECTIFIER (Dc Components)
  • MP601 - SINGLE-PHASE SILICON BRIDGE RECTIFIER (Dc Components)
  • MP602 - SINGLE-PHASE SILICON BRIDGE RECTIFIER (Dc Components)
  • MP604 - SINGLE-PHASE SILICON BRIDGE RECTIFIER (Dc Components)
  • MP606 - SINGLE-PHASE SILICON BRIDGE RECTIFIER (Dc Components)
  • MP608 - SINGLE-PHASE SILICON BRIDGE RECTIFIER (Dc Components)
  • MP60G - VOLTAGE REGULATOR MODULE FOR INTEL ADVANCED PROCESSORS (Semtech Corporation)
Other Datasheets by MPS

Full PDF Text Transcription

Click to expand full text
DESCRIPTION The MP6632 is a three-phase brushless DC (BLDC) motor driver controller with up to 1A of driving current. It drives three-phase BLDC motors, with a 6V to 50V input voltage (VIN) range. The MP6632 controls the motor speed through the pulse-width modulation (PWM) signal or the DC signal on the PWM/DC pin with closedloop/open-loop speed control. The device features a built-in, configurable speed curve function. It also features a sinusoidal drive for maximum torque, as well as low speed ripple and noise across the full speed range. The MP6632 provides rotational speed detection. The rotational speed detector (the FG/RD pin) is an open-drain output. It outputs a high or low voltage relative to the Hall comparator’s output. Direction control is achieved via the DIR pin’s input.
Published: |