Datasheet4U Logo Datasheet4U.com

MP8757GL - Step-Down Converter

This page provides the datasheet information for the MP8757GL, a member of the MP8757 Step-Down Converter family.

Description

The MP8757 is a fully-integrated, high frequency, synchronous, rectified, step-down converter.

It offers a very compact solution to achieve a 7A output current over a wide inputsupply range with excellent load and line regulation.

Features

  • include OCP, OVP, and thermal shut down. MP8757 requires minimum number of external components and are available in QFN21 (3mmx4mm) package.

📥 Download Datasheet

Datasheet preview – MP8757GL

📁 Similar Datasheet

  • MP8755 - Multimedia Projector Service Manual (3M)
  • MP8745 - Multimedia Projector Service Manual (3M)
  • MP8770 - Multimedia Projector Service Manual (3M)
  • MP8775 - High Speed Analog-to-Digital Converter (Exar)
  • MP8776 - Low Power Analog-to-Digital Converter (Exar)
  • MP8780 - CMOS 8 BIT VIDEO ANALOG TO DIGITAL CONVERTER (Exar)
  • MP8784 - CMOS 5 MSPS 10BIT HIGH SPEED ANALOG TO DIGITAL CONVERTER (Exar)
  • MP8786 - CMOS 30 MSPS Low Power Analog-to-Digital Converter (Exar)
  • MP8795 - CMOS 1.5 MSPS VERY LOW POWER 10-BIT ANALOG-TO-DIGITAL CONVERTER (Exar Corporation)
  • MP8798 - 1 MSPS 10-Bit Analog-to-Digital Converter (Exar Corporation)
Other Datasheets by MPS
  • MP8757 - Step-Down Converter
  • MP8759 - Step-Down Converter
  • MP8759GD - Step-Down Converter
  • MP8706 - Synchronous Step-down Converter
  • MP8706EN - Synchronous Step-down Converter
  • MP8712 - Synchronous Step-Down Converter
  • MP8712GL - Synchronous Step-Down Converter
  • MP8720 - Buck Converter

Full PDF Text Transcription

Click to expand full text
MP8757 High Efficiency, 7A, 18V Synchronous, Step-Down Converter DESCRIPTION The MP8757 is a fully-integrated, high frequency, synchronous, rectified, step-down converter. It offers a very compact solution to achieve a 7A output current over a wide inputsupply range with excellent load and line regulation. MP8757 employs the Constant-On-Time (COT) control scheme, which provides fast transient response, eases loop stabilization. The COT control scheme provides seamless transition to PFM mode at light load operation which boosts the light load efficiency. Under voltage lockout is internally set as 4.5V. An open drain power good signal indicates output voltage is within its nominal voltage range. Full protection features include OCP, OVP, and thermal shut down.
Published: |