MPQ8904 Datasheet | Monolithic Power Systems

DESCRIPTION The MPQ8904 is a low-current, low-dropout, linear regulator that operates on a single 2.5Vto-6.5V input supply. An external resistor controls the output voltage. The MPQ8904 can supply up to 500m A of load current. The enable pin (EN) allows the part to enter a low-current shutdown mode (EN=0). The MPQ8904 features thermal overload and current limit protection. It is available in an 8-pin QFN (2×3mm) package. Industrial/Automotive-Grade 500m A Linear Regulator AEC-Q100 Qualified FEATURES - Power-Good Open Collector Output - Guaranteed Industrial/Automotive Temp. Range Limits - Operates from a 2.5V-to-6.5V Input - Low 300m V Dropout at 500m A Output - Stable with Very Small Ceramic Capacitors - 2.5% Feedback Reference - Adjustable Output Voltage from 0.5V to 5V - Better than 0.001%/m A Load Regulation - Stable with Low-ESR Output Capacitor - Low 140μA Ground Current - Internal Thermal Protection - Current Limit Protection - 7µA Typical Quiescent Current at Shutdown - Available in AEC-Q100 Qualified Grade 1 APPLICATIONS - Low-Current Regulators - Battery-Powered Systems - Mobile Devices, such as Cell Phones and GPS Navigators All MPS parts are lead-free, halogen free, and adhere to the Ro HS directive. For MPS green status, please visit MPS website under Quality Assurance. “MPS” and “The Future of Analog IC Technology” are Registered Trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION MPQ8904 Rev. 1.1 .Monolithic Power. 3/8/2024 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2024 MPS. All Rights Reserved. - INDUSTRIAL-GRADE, 500m A LINEAR REGULATOR, AEC-Q100 QUALIFIED ORDERING INFORMATION Part Number MPQ8904DD-AEC1- MPQ8904DD- - Package QFN-8 (2mm x 3mm) Top Marking See Below - For Tape & Reel, add...