MH183 Datasheet | MST

MH 183 CMOS Unipolar Hall Switch MH 183 is a unipolar Hall effect sensor IC. It incorporates advanced chopper stabilization technology to provide accurate and stable magnetic switch points. The design, specifications and performance have been optimized for applications of solid state switches. The output transistor will be switched on (BOP) in the presence of a sufficiently strong South pole magnetic field facing the marked side of the package. Similarly, the output will be switched off (BRP) in the presence of a weaker South field and remain off with “0” field. The package type is in a lead (Pb)-free version was verified by third party organization. Features and Benefits CMOS Hall IC Technology Solid-State Reliability Chopper stabilized amplifier stage Unipolar, output switches with absolute value of South pole from magnet Operation down to 2.5V High Sensitivity for direct reed switch replacement applications Small Size in To 92S or Sot 23 package. 100% tested at 125℃ for K Spec. Custom sensitivity / Temperature selection are available. Applications Solid state switch Limit switch Current limit Interrupter Current sensing Magnet proximity sensor for reed switch replacement in low duty cycle applications Ordering Information XX-XXX X XX-X-XX XX-X Lead Free Handling Code Package Identification Sorting Code Package type Temperature code Part number pany Name and Product Category pany Name and Product Category MH:MST Hall Effect/MP:MST Power MOSFET Part number 181,182,183,184,185,248,249… Temperature range E: 85 Degree C, K: 125 Degree C, L: 150 Degree C Package type UA:TO-92S,SO:SOT-23,ST:Tsot-25,SU:USON Sorting α,β,Blank….. Package Identification Code 01,02,03….. Handling Code BLANK: ESD bag, TR: Tape & Reel Lead Free...