MX25L1005 Datasheet | Macronix

FEATURES GENERAL - Serial Peripheral Interface (SPI) patible -- Mode 0 and Mode 3 - 1,048,576 x 1 bit structure - 32 Equal Sectors with 4K byte each - Any Sector can be erased individually - 2 Equal Blocks with 64K byte each - Any Block can be erased individually - Single Power Supply Operation - 2.7 to 3.6 volt for read, erase, and program operations - Latch-up protected to 100m A from -1V to Vcc +1V PERFORMANCE - High Performance - Fast access time: 85MHz serial clock (15p F + 1TTL Load) and 66MHz serial clock (30p F + 1TTL Load) - Fast program time: 1.4ms(typ.) and 5ms(max.)/page (256-byte per page) - Fast erase time: 60ms(typ.) and 120ms(max.)/sector (4K-byte per sector) ; 1s(typ.) and 2s(max.)/block (64K-byte per block) - Low Power Consumption - Low active read current: 12m A(max.) at 85MHz, 8m A(max.) at 66MHz and 4m A(max.) at 33MHz - Low active programming current: 15m A (max.) - Low active erase current: 15m A (max.) - Low standby current: 10u A (max.) - Deep power-down mode 1u A (typical) - Minimum 100,000 erase/program cycles SOFTWARE FEATURES - Input Data Format - 1-byte mand code - Block Lock protection - The BP0~BP1 status bit defines the size of the area to be software protected against Program and Erase instructions. - Auto Erase and Auto Program Algorithm - Automatically erases and verifies data at selected sector - Automatically programs and verifies data at selected page by an internal algorithm that automatically times the program pulse widths (Any page to be programed should have page in the erased state first) - Status Register Feature P/N: PM1238 REV. 2.0, APR. 15, 2009 2 - Electronic Identification - JEDEC 2-byte Device ID - RES mand, 1-byte Device ID HARDWARE FEATURES - SCLK...