MT1102ET datasheet by MagnTek.
| Part number | MT1102ET |
|---|---|
| Datasheet | MT1102ET_MagnTek.pdf |
| File Size | 1.22 MB |
| Manufacturer | MagnTek |
| Description | Hall-Effect Magnetic Position Sensors |
|
|
They are designed to respond to a single pole: North (AT) or South (A, BT and ET). While the magnetic flux density(B) is larger than operate point (Bop), the output will be turned on (Low), while the magnetic flux density(B) is lower than release point (Brp), then turn off (High).
| Part Number | Description |
|---|---|
| MT1102 | Hall-Effect Magnetic Position Sensors |
| MT1102A | Hall-Effect Magnetic Position Sensors |
| MT1102A-T | Hall-Effect Magnetic Position Sensors |
| MT1102AT | Hall-Effect Magnetic Position Sensors |
| MT1102BT | Hall-Effect Magnetic Position Sensors |
| MT1103 | Hall-Effect Magnetic Position Sensors |
| MT1103A | Hall-Effect Magnetic Position Sensors |
| MT1103A-T | Hall-Effect Magnetic Position Sensors |
| MT1103AT | Hall-Effect Magnetic Position Sensors |
| MT1103BT | Hall-Effect Magnetic Position Sensors |
