900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






MagnTek

MT1103ET Datasheet Preview

MT1103ET Datasheet

Hall-Effect Magnetic Position Sensors

No Preview Available !

MT1103 Series
CMOS, Uni-polar, Hall-Effect Magnetic Position Sensors
Features and Benefits
CMOS Technology
Magnetic Type: Uni-polar
Wide Operating Voltage Range:
Supply Voltage 2.8~24V
℃ ℃Specified Operating Temperature Range:
From –40 ~125
Magnetic Sensitivity
Bop=120Gauss, Brp=90Gauss (typical)
Lower Power Consumption
Supply Current <3mA (typical)
Lead Free Package
SIP-3, SOT-23, SOT-89B
High ESD Rating
Open Drain Output
RoHS Compliant
2011/65/EU
Applications
Automotive, Home appliances, Industrial
Speed Detection
Position Detection
Magnetic Encoder
Solid-State Switch
Proximity Switch
Family Members
Part number
MT1103A
MT1103A-T
MT1103AT
MT1103BT
MT1103ET
Description
Flat TO-92 package, bulk packaging (1000pcs/bag)
Flat TO-92 package, Radial lead, bulk packaging (1000pcs/bag)
SOT-23 package, tape and reel packaging (3000pcs/bag)
SOT-89B package, tape and reel packaging (1000pcs/bag)
SOT-23(thin outline) package, tape and reel packaging (3000pcs/bag)
General Description
The MT1103 family, produced with CMOS technology, The Hall IC internally includes an on-chip Hall
voltage generator, a voltage regulator for operation with supply voltages of 2.8 to 24V, temperature
compensation circuitry, small-signal amplifier, Hall sensor with dynamic offset cancellation system,
Schmitt trigger and an open-drain output.
They are designed to respond to a single pole: North (AT) or South (A, BT and ET). While the magnetic
flux density(B) is larger than operate point (Bop), the output will be turned on (Low), while the magnetic
flux density(B) is lower than release point (Brp), then turn off (High).
The MT1103 family provides a variety of packages to customers: SOT-23/SOT-89B for surface mount and
TO-92 flat for through-hole mount. All packages are RoHS compliant.
www.magntek.de
Rev.5 12/2014
01/10




MagnTek

MT1103ET Datasheet Preview

MT1103ET Datasheet

Hall-Effect Magnetic Position Sensors

No Preview Available !

MT1103 Series
CMOS, Uni-polar, Hall-Effect Magnetic Position Sensors
VS
Reference
Regulator
OSC
Dynamic offset
cancellation
Hall
element
Output
ITA COMP
Stage
VOUT
GND
Functional Block Diagram
Function Description
Definition of Magnetic Parameters
BOP:
Operating Point
Magnetic flux density applied on the branded side of the package which
turns the output driver ON (VOUT = Low)
BRP:
Release Point
Magnetic flux density applied on the branded side of the package which
turns the output driver OFF (VOUT = high)
BHYST: Hysteresis Window
BOP-BRP
Definition of Switching Function
Output (V)
Output (V)
North Pole
BOP
BRP
0
Switching Behavior of AT
www.magntek.de
Rev.5 12/2014
0 BRP BOP South Pole
Switching Behavior of A, BT and ET
02/10


Part Number MT1103ET
Description Hall-Effect Magnetic Position Sensors
Maker MagnTek
Total Page 10 Pages
PDF Download

MT1103ET Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 MT1103ET Hall-Effect Magnetic Position Sensors
MagnTek





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy