MC2TA7402 - Driver LSI

MagnaChip

Key Features

s of low voltage operation: IOVCC = 1.6 to 3.3 V (interface I/O power supply) VCI= 2.5 to 3.3 V (analog power supply) DDVDH = 4.5 to 5.5 V (liquid-crystal drive voltage).
Power-saving function (sleep mode / standby mode, etc. ).
Partial display function for selectively driving an LCD, enabling two displays at arbitrarily set positions.
A voltage follower circuit for generating LCD driving voltages with a small direct current through bleeder resistors.
Incorpora.

MC2TA7402 driver lsi by MagnaChip - Datasheet Preview

Datasheet Details

Part number	MC2TA7402
Manufacturer	MagnaChip
File Size	1.64 MB
Description	Driver LSI
Datasheet	MC2TA7402 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
MC2002	6 SEGMENT X 7 GRID LED DRIVER	ABOV
MC2002-01	Standard LCD	Bona
MC2004-01	Standard LCD	Bona
MC2004-06	Standard LCD	Bona
MC2004E	LCD	EVERBOUQUET

Other Datasheets by MagnaChip

Part Number	Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

MC2TA7402 Specifications Ver. 1.03 Driver LSI for a color TFT LCD Panel MC2TA7402 Approved by : Yoshio Imamura Checked by : Jun Takasu Prepared by : Keiji Hayashi Issued date : March 23,2007 This document is subject to change without notice. MagnaChip CONFIDENTIAL 1 / 156 MC2TA7402 Ver.1.03 MC2TA7402 1. Introduction The MC2TA7402 is a one-chip controller driver LSI for a TFT liquid crystal display of 262,144 colors, with the integrated DDRAM for graphics data of 176 RGB x 220 dots at maximum, gate drivers, source drivers and power supply circuits. The MC2TA7402 supports high-speed parallel interfaces with 8-, 9-, 16-, 18-bit buses and a high-speed serial peripheral interface (SPI) to write RAM graphics data at high speed.