Datasheet4U Logo Datasheet4U.com

RCT-1800 - AC Current Sensor

General Description

Magnelab RCT-1800 Series flexible RopeCT® current sensor measures AC current up to 5,000 Amps.

The coil opens at the connector junction and can be installed on an existing cable or buss-bar in a matter of seconds.

Key Features

  • Input from 250 Amp to 5,000 Amp Output of 0.333 Volt at rated current Linearity Accuracy 1% Accuracy from 100 Amps to 15,000 Amps Phase angle < 0.5 degrees measured at 50% rated current Integrator requires power supply 12 to 30V AC or DC (not included) 8 ft. twisted pair leads RCT-1800-YYYY RCT-1800-0250 RCT-1800-0400 RCT-1800-0500 RCT-1800-0800 RCT-1800-1000 Optional Rating.
  • 250 Amp 400 Amp 500 Amp 800 Amp 1000 Am.

📥 Download Datasheet

Datasheet Details

Part number RCT-1800
Manufacturer Magnelab
File Size 126.68 KB
Description AC Current Sensor
Datasheet download datasheet RCT-1800 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RCT-433-AS Suface Mount 433.92 MHz SAW-Stabilized OOK Transmitter Radiotronix
RCT-433-AS Low-Cost SAW-stabilized surface mount OOK RF transmitter Radiotronix
RCT-433-ASB Low-Cost SAW-stabilized surface mount OOK RF transmitter Radiotronix
RCT-433-UTR Ultra-Tiny Transmitter Radiotronix
RCT02 Encoder UTC

Other Datasheets by Magnelab

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAGNELAB RopeCT® AC Current Sensor RCT-1800 18 Inch Rogowski Coil Description: Magnelab RCT-1800 Series flexible RopeCT® current sensor measures AC current up to 5,000 Amps. The coil opens at the connector junction and can be installed on an existing cable or buss-bar in a matter of seconds. Features: • • • • • • • Input from 250 Amp to 5,000 Amp Output of 0.333 Volt at rated current Linearity Accuracy 1% Accuracy from 100 Amps to 15,000 Amps Phase angle < 0.5 degrees measured at 50% rated current Integrator requires power supply 12 to 30V AC or DC (not included) 8 ft.