Datasheet4U Logo Datasheet4U.com

MB1000 - High Performance Sonar Range Finder

Datasheet Summary

Description

Pin 1-BW-

Leave open or hold low for serial output on the TX output.

When BW pin is held high the TX output sends a pulse (instead of serial data), suitable for low noise chaining.

Pin 2-PW- This pin outputs a pulse width representation of range.

Features

  • Continuously variable gain for control and side lobe suppression.
  • Object detection to zero range objects.
  • 2.5V to 5.5V supply with 2mA typical current draw.
  • Readings can occur up to every 50mS, (20-Hz rate).
  • Free run operation can continually measure and output range information.
  • Triggered operation provides the range reading as desired.
  • Interfaces are active simultaneously.
  • Serial, 0 to Vcc, 9600 Baud, 81N.
  • Analog, (Vcc/512) / inch.
  • Pulse width.

📥 Download Datasheet

Datasheet preview – MB1000

Datasheet Details

Part number MB1000
Manufacturer MaxBotix
File Size 1.92 MB
Description High Performance Sonar Range Finder
Datasheet download datasheet MB1000 Datasheet
Additional preview pages of the MB1000 datasheet.
Other Datasheets by MaxBotix

Full PDF Text Transcription

Click to expand full text
LV-MaxSonar®-EZ™ Series LV-MaxSonar® - EZ™ Series High Performance Sonar Range Finder MB1000, MB1010, MB1020, MB1030, MB1040 With 2.5V - 5.5V power the LV-MaxSonar-EZ provides very short to long-range detection and ranging in a very small package. The LV-MaxSonar-EZ detects objects from 0-inches to 254-inches (6.45-meters) and provides sonar range information from 6-inches out to 254-inches with 1-inch resolution. Objects from 0-inches to 6-inches typically range as 6-inches1. The interface output formats included are pulse width output, analog voltage output, and RS232 serial output. Factory calibration and testing is completed with a flat object.
Published: |