88LX2730
88LX2730 is Wave-2 G.hn AFE manufactured by MaxLinear.
Description
This data sheet describes Max Linear’s 88LX2730 Wave-2 G.hn AFE. The 88LX2730 is a programmable, high-performance Wave-2 G.hn AFE with a single transmission and reception channel to enable both SISO 200MHz operation using one device and MIMO 100MHz using two devices.
Applications
- Coax/phone line-to-Ethernet adapter.
- Wi Fi extender.
- Embedded G.hn modem.
- G.hn access multiplexer (GAM)
- G.hn distribution point units (DPU)
Features
- Designed for baseband coaxial and phone line wiring.
- Programmable transmission and reception gains.
- Integrated filters.
- Integrated line drivers.
- Power down and standby mode.
- Equalization in reception.
- Impedance sensing support.
- Very low noise and distortion over the entire transmission and reception paths.
- 28 pin QFN 4×4mm package.
- Support for multiple AFEs operating in parallel with only one digital baseband (DBB) processor 88LX5153.
Supported Standards
- Code of Conduct on Energy Consumption of Broadband
Equipment Version 5.0, European mission.
- ITU-T G.9960: Unified high-speed wireline-based home networking transceivers
- System architecture and physical layer specification (referenced as ITU-T G.9960).
- ITU-T G.9961: Unified high-speed wire-line based home networking transceivers
- Data link layer specification (referenced as ITU-T G.9961).
- ITU-G.9962: Unified high-speed wire-line based home networking transceivers
- Management specification (referenced as ITU-T G.9962).
- ITU-T G.9963: Unified high-speed wireline-based home networking transceivers
- Multiple input/multiple output specification (referenced as ITU-T G.9963).
- ITU-T G.9964: Unified high-speed wire-line based home networking transceivers
- Power spectral density specification (referenced as ITU-T G.9964).
- .maxlinear.- 073-2730DSR03
88LX2730 Data Sheet
Revision History
Document No. Release Date 073-2730DSR03 July 14, 2020
057DSR02
July 18, 2017
Change Description
Updated:...
