900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






MaxLinear

XR10910 Datasheet Preview

XR10910 Datasheet

16:1 Sensor Interface AFE

No Preview Available !

XR10910
16:1 Sensor Interface AFE
General Description
The XR10910 is a unique sensor interface integrated circuit with an on-board
16:1 multiplexer, offset correction DAC, instrumentation amplifier and voltage
reference. The XR10910 is designed to integrate multiple bridge sensors
with a microcontroller (MCU) or field-programmable gate array (FPGA).
The integrated offset correction DAC provides digital calibration of the
variable and in many cases substantial offset voltage generated by the
bridge sensors. The DAC is controlled by an I2C compatible 2 wire serial
interface. The serial interface also provides the user with easy controls to the
XR10910’s many functions such as input and gain selection.
An integrated LDO provides a regulated voltage to power the input bridge
sensors and is selectable, between 3V and 2.65V, via the serial interface
for lower voltage compatibility. The LDO current can be sensed and a
proportional voltage present at the output of the IC for monitoring the LDO
current.
The XR10910 offers 8 fixed gain settings (from 2V/V to 760V/V), each with
an error of only ±0.5%, that are selectable via the I2C interface. It also offers
less than 1mV maximum input offset voltage, 100pA maximum input bias
current, and 100pA maximum input offset current.
The XR10910 is designed to operate from 2.7V to 5V supplies and is specified
over the industrial temperature range of -40°C to +85°C. It is offered in a
space saving 6mm x 6mm QFN-40 package. It consumes less than 556μA
maximum supply current and offers a sleep mode for added power savings.
The low power, low input bias current and integrated features make the
XR10910 well suited for both industrial and consumer applications using
bridge sensors.
F E AT U R E S
Integrated features for interfacing multiple
bridge sensors with an MCU or FPGA:
16:1 differential mux with I2C interface
Instrumentation amplifier
LDO
Offset correction DAC with I2C interface
(±560mV offset correction range - RTI)
Eight selectable voltage gains from 2V/V
to 760V/V with only ±0.5% gain error
1mV maximum input offset voltage
100pA maximum input bias current
556μA maximum supply current
2.7V to 5V analog supply voltage range
1.8V to 5V digital supply voltage range
-40˚C to +85˚C temperature range
6mm x 6mm QFN-40 package
A P P L I C AT I O N S
Bridge sensor interface
Pressure & temperature sensors
Strain gauge amplifier
Industrial process controls
Weigh scales
Ordering Information - back page
Typical Application
BRIDGE 16
BRIDGE 1
6.8μF
+
VCC
6.8μF
+
VDD
0.1μF
BRDG VCC
0.1μF
VDD
IN16+
LDO
0.1μF
IN16-
16:1
MUX
IN1+
IN1-
INA / OUT 10k
PGA
±560mV
OFFSET TRIM
10-BIT
DAC
PGA
I2C
CONTROL
VDD
4.7k
SDA
SCL
10nF
VDD
4.7k
ADC
XR10910
AGND
DGND
Figure 1. Typical Application
µC
2.5
2
1.5
1
0.5
0
-0.5
-1
-1.5
-2
-2.5
0 2 4 6 8 10
Time (sec)
Figure 2. 0.1Hz to 10Hz RTI Voltage Noise
REV 1D
1/22




MaxLinear

XR10910 Datasheet Preview

XR10910 Datasheet

16:1 Sensor Interface AFE

No Preview Available !

XR10910
Absolute Maximum Ratings
Stresses beyond the limits listed below may cause
permanent damage to the device. Exposure to any Absolute
Maximum Rating condition for extended periods may affect
device reliability and lifetime.
Analog Supply Voltage (VCC).......................................... 0V to 5.5V
Digital Supply Voltage (VDD)........................................... 0V to 5.5V
Digital Input/Output (VDDIO)............................................ 0V to 5.5V
VIN......................................................................................0 to VCC
Differential Input Voltage (current limit of 10mA)....................... VCC
ESD Rating (HBM - Human Body Model)..................................4kV
Operating Conditions
Analog Supply Voltage Range................................... 2.7V to 5.25V
Digital Supply Voltage Range.....................................1.7V to 5.25V
Operating Temperature Range..................................-40°C to 85°C
Junction Temperature............................................................ 150°C
Storage Temperature Range....................................-65°C to 150°C
Lead Temperature (Soldering, 10s).......................................260°C
Package thermal resistance θJA......................................... 32°C/W
NOTE:
1. JEDEC standard, multi-layer test boards, still air.
REV 1D
2/22


Part Number XR10910
Description 16:1 Sensor Interface AFE
Maker MaxLinear
Total Page 22 Pages
PDF Download

XR10910 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 XR10910 16:1 Sensor Interface AFE
MaxLinear
2 XR10910 16:1 Sensor Interface
Exar





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy