Datasheet4U Logo Datasheet4U.com

XRA1402 Datasheet 8-bit Spi Gpio Expander

Manufacturer: MaxLinear

Overview: XRA1402 8-Bit SPI GPIO Expander February 2, 2022 Rev. 1.0.2 GENERAL.

General Description

The XRA1402 is an 8-bit GPIO expander with an SPI interface.

After power-up, the XRA1402 has internal 100K ohm pull-up resistors on each I/O pin that can be individually enabled.

In addition, the GPIOs on the XRA1402 can individually be controlled and configured.

Key Features

  • 1.65V to 3.6V operating voltage.
  • 8 General Purpose I/Os (GPIOs).
  • 5V tolerant inputs.
  • Maximum stand-by current of 1uA at +1.8V.
  • SPI bus interface.
  • SPI Clock Frequency up to 26MHz.
  • Individually programmable inputs.
  • Internal pull-up resistors.
  • Polarity inversion.
  • Individual interrupt enable.
  • Rising edge and/or Falling edge interrupt.
  • Input filter.
  • Individually programmable outputs.
  • Output Level Control.
  • Output Three-State C.

Similar Datasheet

Brand Logo Part Number Description Manufacturer
Exar Logo XRA1402 8-BIT SPI GPIO EXPANDER Exar

More Datasheets from MaxLinear

Part Number Description
XRA1403 16-Bit SPI GPIO Expander
XRA1404 8-Bit SPI GPIO Expander
XRA1201 16-BIT I2C / SMBUS GPIO EXPANDER
XRA1201P 16-BIT I2C / SMBUS GPIO EXPANDER

XRA1402 Distributor