900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Maxim Integrated Semiconductor Electronic Components Datasheet

MAX104 Datasheet

5V / 1Gsps / 8-Bit ADC

No Preview Available !

19-1459; Rev 2; 3/02
EVAALVUAAILTAIOBNLEKIT
±5V, 1Gsps, 8-Bit ADC with
On-Chip 2.2GHz Track/Hold Amplifier
General Description
The MAX104 PECL-compatible, 1Gsps, 8-bit analog-to-
digital converter (ADC) allows accurate digitizing of
analog signals with bandwidths to 2.2GHz. Fabricated
on Maxim’s proprietary advanced GST-2 bipolar
process, the MAX104 integrates a high-performance
track/hold (T/H) amplifier and a quantizer on a single
monolithic die.
The innovative design of the internal T/H, which has an
exceptionally wide 2.2GHz full-power input bandwidth,
results in high performance (greater than 7.5 effective
bits) at the Nyquist frequency. A fully differential com-
parator design and decoding circuitry reduce out-of-
sequence code errors (thermometer bubbles or sparkle
codes) and provide excellent metastable performance
of one error per 1016 clock cycles. Unlike other ADCs
that can have errors resulting in false full- or zero-scale
outputs, the MAX104 limits the error magnitude to
1LSB.
The analog input is designed for either differential or
single-ended use with a ±250mV input voltage range.
Dual, differential, PECL-compatible output data paths
ensure easy interfacing and include an 8:16 demulti-
plexer feature that reduces output data rates to one-half
the sampling clock rate. The PECL outputs can be
operated from any supply between +3V to +5V for com-
patibility with +3.3V or +5V referenced systems. Control
inputs are provided for interleaving additional MAX104
devices to increase the effective system sampling rate.
The MAX104 is packaged in a 25mm x 25mm, 192-con-
tact Enhanced Super-Ball Grid Array (ESBGA™) and is
specified over the commercial (0°C to +70°C) tempera-
ture range.
Applications
Digital RF/IF Signal Processing
Direct RF Downconversion
High-Speed Data Acquisition
Digital Oscilloscopes
High-Energy Physics
Radar/Sonar/ECM Systems
ATE Systems
Features
o 1Gsps Conversion Rate
o 2.2GHz Full-Power Analog Input Bandwidth
o >7.5 Effective Bits at fIN = 500MHz (Nyquist
Frequency)
o ±0.25LSB INL and DNL
o 50Differential Analog Inputs
o ±250mV Input Signal Range
o On-Chip, +2.5V Precision Bandgap Voltage
Reference
o Latched, Differential PECL Digital Outputs
o Low Error Rate: 10-16 Metastable States at 1Gsps
o Selectable 8:16 Demultiplexer
o Internal Demux Reset Input with Reset Output
o 192-Contact ESBGA Package
Ordering Information
PART
MAX104CHC
TEMP RANGE
0°C to +70°C
PIN-PACKAGE
192 ESBGA
192-Contact ESBGA
Ball Assignment Matrix
TOP VIEW
MAX104
Typical Operating Circuit appears at end of data sheet.
ESBGA is a trademark of Amkor/Anam.
ESBGA
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.


Maxim Integrated Semiconductor Electronic Components Datasheet

MAX104 Datasheet

5V / 1Gsps / 8-Bit ADC

No Preview Available !

±5V, 1Gsps, 8-Bit ADC with
On-Chip 2.2GHz Track/Hold Amplifier
ABSOLUTE MAXIMUM RATINGS
VCCA to GNDA .........................................................-0.3V to +6V
VCCD to GNDD.........................................................-0.3V to +6V
VCCI to GNDI ............................................................-0.3V to +6V
VCCO to GNDD ........................................-0.3V to (VCCD + 0.3V)
AUXEN1, AUXEN2 to GND .....................-0.3V to (VCCD + 0.3V)
VEE to GNDI..............................................................-6V to +0.3V
Between GNDs......................................................-0.3V to +0.3V
VCCA to VCCD .......................................................-0.3V to +0.3V
VCCA to VCCI.........................................................-0.3V to +0.3V
PECL Digital Output Current ...............................................50mA
REFIN to GNDR ........................................-0.3V to (VCCI + 0.3V)
REFOUT Current ................................................+100µA to -5mA
ICONST, IPTAT to GNDI .......................................-0.3V to +1.0V
TTL/CMOS Control Inputs (DEMUXEN,
DIVSELECT)..........................................-0.3V to (VCCD + 0.3V)
RSTIN+, RSTIN- ......................................-0.3V to (VCCO + 0.3V)
VOSADJ Adjust Input ................................-0.3V to (VCCI + 0.3V)
CLK+ to CLK- Voltage Difference..........................................±3V
CLK+, CLK-.....................................(VEE - 0.3V) to (GNDD + 1V)
CLKCOM.........................................(VEE - 0.3V) to (GNDD + 1V)
VIN+ to VIN- Voltage Difference ............................................±2V
VIN+, VIN- to GNDI................................................................±2V
Continuous Power Dissipation (TA = +70°C)
192-Contact ESBGA (derate 61mW/°C above +70°C) ......4.88W
(with heatsink and 200 LFM airflow,
derate 106mW/°C above +70°C) ........................................8.48W
Operating Temperature Range
MAX104CHC........................................................0°C to +70°C
Operating Junction Temperature.....................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
DC ELECTRICAL CHARACTERISTICS
(VCCA = VCCI = VCCD = +5.0V ±5%, VEE = -5.0V ±5%, VCCO = +3.0V to VCCD, REFIN connected to REFOUT, TA = TMIN to TMAX,
unless otherwise noted. Typical values are at TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
ACCURACY
Resolution
RES
8 Bits
Integral Nonlinearity (Note 1)
Differential Nonlinearity (Note 1)
Missing Codes
INL
DNL
TA = +25°C
TA = +25°C
No missing codes guaranteed
-0.5 ±0.25 0.5
LSB
-0.5 ±0.25 0.5
LSB
None Codes
ANALOG INPUTS
Full-Scale Input Range
Common-Mode Input Range
Input Resistance
VFSR
VCM
RIN
Note 1
Signal + offset w.r.t. GNDI
VIN+ and VIN- to GNDI, TA = +25°C
475 500 525 mVp-p
±0.8
V
49 50 51
Input Resistance Temperature
Coefficient
TCR
150 ppm/°C
VOS ADJUST CONTROL INPUT
Input Resistance (Note 2)
RVOS
Input VOS Adjust Range
REFERENCE INPUT AND OUTPUT
VOSADJ = 0 to 2.5V
14 25
±4 ±5.5
k
LSB
Reference Output Voltage
REFOUT Driving REFIN input only
2.475 2.50 2.525
V
Reference Output Load
Regulation
REFOUT 0 < ISOURCE < 2.5mA
5 mV
Reference Input Resistance
RREF Referenced to GNDR
45
k
2 _______________________________________________________________________________________


Part Number MAX104
Description 5V / 1Gsps / 8-Bit ADC
Maker Maxim
Total Page 30 Pages
PDF Download

MAX104 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 MAX100 250Msps / 8-Bit ADC with Track/Hold
Maxim
2 MAX1002 Low-Power / 60Msps / Dual / 6-Bit ADC
Maxim
3 MAX1003 Low-Power / 90Msps / Dual 6-Bit ADC
Maxim
4 MAX1005 IF Undersampler
Maxim
5 MAX1007 Mobile-Radio Analog Controller
Maxim
6 MAX101 500Msps / 8-Bit ADC with Track/Hold
Maxim
7 MAX1011 Low-Power / 90Msps / 6-Bit ADC
Maxim
8 MAX101A 500Msps / 8-Bit ADC
Maxim
9 MAX1020 Multichannel ADCs/DACs
Maxim Integrated





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy