Datasheet4U Logo Datasheet4U.com

MAX1192 - Dual 8-Bit ADC

Description

The MAX1192 is an ultra-low-power, dual, 8-bit, 22Msps analog-to-digital converter (ADC).

Features

  • two fully differential wideband track-and-hold (T/H) inputs. These inputs have a 440MHz bandwidth and accept fully differential or single-ended signals. The MAX1192 delivers a typical signal-to-noise and distortion (SINAD) of 48.6dB at an input frequency of 5.5MHz and a sampling rate of 22Msps while consuming only 27.3mW. This ADC operates from a 2.7V to 3.6V analog power supply. A separate 1.8V to 3.6V supply powers the digital output driver. In addition to ultra-low operating power, the MAX119.

📥 Download Datasheet

📁 Similar Datasheet

  • MAX11900 - Fully Differential SAR ADC (Maxim Integrated)
  • MAX11901 - Fully Differential SAR ADC (Maxim Integrated)
  • MAX11902 - Fully Differential SAR ADC (Maxim Integrated Products)
  • MAX11903 - Fully Differential SAR ADC (Maxim Integrated)
  • MAX11904 - Fully Differential SAR ADC (Maxim Integrated Products)
  • MAX11960 - Differential SAR ADC (Maxim Integrated)
  • MAX11014 - Automatic RF MESFET Amplifier Drain-Current Controllers (Maxim Integrated Products)
  • MAX11015 - Automatic RF MESFET Amplifier Drain-Current Controllers (Maxim Integrated Products)
  • MAX1103 - 8-Bit CODECs (Maxim Integrated)
  • MAX1104 - 8-Bit CODECs (Maxim Integrated)
Other Datasheets by Maxim
  • MAX1190 - Low-Power ADC
  • MAX11905 - Fully Differential SAR ADC
  • MAX1196 - Dual 8-Bit / 40Msps / 3V / Low-Power ADC with Internal Reference and Multiplexed Parallel Outputs
  • MAX1198 - Dual / 8-Bit / 100Msps / 3.3V / Low-Power ADC
  • MAX110 - Low-Cost / 2-Channel / 14-Bit Serial ADCs
  • MAX1101 - Single-Chip / 8-Bit CCD Digitizer
  • MAX1102 - 8-Bit CODECs
  • MAX1106 - Single-Supply / Low-Power / Serial 8-Bit ADCs

Full PDF Text Transcription

Click to expand full text
MAX1192 19-2835; Rev 2; 7/09 Ultra-Low-Power, 22Msps, Dual 8-Bit ADC General Description The MAX1192 is an ultra-low-power, dual, 8-bit, 22Msps analog-to-digital converter (ADC). The device features two fully differential wideband track-and-hold (T/H) inputs. These inputs have a 440MHz bandwidth and accept fully differential or single-ended signals. The MAX1192 delivers a typical signal-to-noise and distortion (SINAD) of 48.6dB at an input frequency of 5.5MHz and a sampling rate of 22Msps while consuming only 27.3mW. This ADC operates from a 2.7V to 3.6V analog power supply. A separate 1.8V to 3.6V supply powers the digital output driver. In addition to ultra-low operating power, the MAX1192 features three power-down modes to conserve power during idle periods.
Published: |