Datasheet4U Logo Datasheet4U.com

MAX14890E Datasheet Incremental Encoder Interface

Manufacturer: Maxim Integrated (now Analog Devices)

📥 Download Datasheet

General Description

The MAX14890E incremental encoder receiver contains four differential receivers and two single-ended receivers.

The differential receivers can be operated in RS-422 or differential high-threshold logic (HTL) modes and are optionally configurable for single-ended TTL/HTL operation.

The MAX14890E

Overview

MAX14890E Incremental Encoder Interface for RS-422, HTL, and TTL with Digital Inputs.

Key Features

  • a wide common mode input range of -20V to +20V in RS-422 mode. The auxiliary IEC 61131-2 Type-1/Type-3 digital inputs are designed for operation with switches or proximity sensors and can be individually configured for TTL operation. All receiver input signals are fault protected to voltage shorts in the ±40V range. Per channel fault detection provides warning of irregular conditions such as small differential signals, shorts, opens, overvoltages, and undervoltages. The MAX14890E features a pin-.

More Datasheets from Maxim Integrated (now Analog Devices)

Part Number Description
MAX14895E Enhanced VGA Port Protector
MAX1489E 15kV ESD-Protected / Quad / Low-Power RS-232 Line Receiver
MAX148 +2.7V to +5.25V / Low-Power / 8-Channel / Serial 10-Bit ADCs
MAX1481 RS-485/RS-422 Transceivers
MAX1482 Slew-Rate-Limited RS-485 Transceivers
MAX1483 Slew-Rate-Limited RS-485 Transceivers
MAX1487 Low-Power / Slew-Rate-Limited RS-485/RS-422 Transceivers
MAX14870 Compact 4.5V to 36V Full-Bridge DC Motor Drivers
MAX14871 4.5V to 36V Full-Bridge DC Motor Driver
MAX14872 Compact 4.5V to 36V Full-Bridge DC Motor Drivers