Datasheet4U Logo Datasheet4U.com

MAX1846 - High-Efficiency / Current-Mode / Inverting PWM Controller

Description

MAX1846/MAX1847 high-efficiency PWM inverting controllers allow designers to implement compact, lownoise, negative-output DC-DC converters for telecom and networking applications.

Both devices operate from +3V to +16.5V input and generate -2V to -200V output.

Features

  • clock synchronization and shutdown functions. The MAX1847 can also be configured to operate as an inverting flyback controller with an Nchannel MOSFET and a transformer to deliver up to 70W. The MAX1847 is available in a 16-pin QSOP package. Current-mode control simplifies compensation and provides good transient response. Accurate current-mode control and over current protection are achieved through low-side current sensing. o 90% Efficiency o +3.0V to +16.5V Input Range o -2V to -200V Output o.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1841 Low-Voltage SIM/Smart Card Level Translators Maxim Integrated
MAX1844 High-Speed Step-Down Controller Maxim Integrated Products
MAX18000 500mV to 5.5V Input nanoPower Boost Converter Analog Devices
MAX1806 Low-Voltage Linear Regulator Maxim Integrated
MAX1820 WCDMA Cellular Phone 600mA Buck Regulators Maxim Integrated Products

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX184 High-Speed 12-Bit A/D Converters With External Refernce input
MAX1840 Low-Voltage SIM/Smart Card Level Translators
MAX1842 Step-Down Regulators
MAX1843 2.7A / 1MHz / Low-Voltage / Step-Down Regulator
MAX1845 Dual / High-Efficiency / Step-Down Controller with Accurate Current Limit

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-2091; Rev 0; 8/01 High-Efficiency, Current-Mode, Inverting PWM Controller General Description MAX1846/MAX1847 high-efficiency PWM inverting controllers allow designers to implement compact, lownoise, negative-output DC-DC converters for telecom and networking applications. Both devices operate from +3V to +16.5V input and generate -2V to -200V output. To minimize switching noise, both devices feature a current-mode, constant-frequency PWM control scheme. The operating frequency can be set from 100kHz to 500kHz through a resistor. The MAX1846 is available in an ultra-compact 10-pin µMAX package. Operation at high frequency, compatibility with ceramic capacitors, and inverting topology without transformers allow for a compact design.
Published: |