Datasheet4U Logo Datasheet4U.com

MAX1910 - 1.5x/2x High-Efficiency White LED Charge Pumps

Datasheet Summary

Description

The MAX1910/MAX1912 power LEDs with a regulated output voltage or current (up to 120mA) from an unregulated input supply (2.7V to 5.3V).

These are complete DC-DC converters requiring only four small ceramic capacitors and no inductors.

Features

  • High-Efficiency 1.5x/2x Charge Pumps.
  • Low Input Ripple with 750kHz Operation.
  • 200mV Current-Sense Threshold Reduces Power Loss.
  • Current- or Voltage-Regulated Charge Pump.
  • Up to 120mA Output Current.
  • No Inductors Required.
  • Small Ceramic Capacitors.
  • Regulated ±5% LED Current.
  • Load Disconnected in Shutdown.
  • 1µA Shutdown Current.
  • Small 10-Pin µMAX Package MAX1910/MAX1912.

📥 Download Datasheet

Datasheet preview – MAX1910

Datasheet Details

Part number MAX1910
Manufacturer Maxim
File Size 211.09 KB
Description 1.5x/2x High-Efficiency White LED Charge Pumps
Datasheet download datasheet MAX1910 Datasheet
Additional preview pages of the MAX1910 datasheet.

📁 Similar Datasheet

  • MAX19191 - 8-Bit ADC (Maxim Integrated Products)
  • MAX19192 - Dual 8-Bit ADC (Maxim Integrated Products)
  • MAX19005 - 200Mbps ATE Drivers/Comparators (Maxim Integrated)
  • MAX1907A - Quick-PWM Master Controllers (Maxim Integrated Products)
  • MAX1908 - Low-Cost Multichemistry Battery Chargers (Maxim Integrated Products)
  • MAX1909 - Multichemistry Battery Charger (Maxim Integrated Products)
  • MAX1920 - 400mA Step-Down DC-DC Converters (Maxim Integrated)
  • MAX1921 - 400mA Step-Down DC-DC Converters (Maxim Integrated)
  • MAX1922 - 1A Current-Limited Switch (Maxim Integrated Products)
  • MAX1928 - PWM Step-Down DC-DC Converters (Maxim Integrated)
Other Datasheets by Maxim
  • MAX191 - 12-Bit Sampling ADC
  • MAX1912 - 1.5x/2x High-Efficiency White LED Charge Pumps
  • MAX1916 - Low-Dropout / Constant-Current Triple White LED Bias Supply
  • MAX1917 - Tracking / Sinking and Sourcing / Synchronous Buck Controller for DDR Memory and Termination Supplies
  • MAX190 - Low-Power / 12-Bit Sampling ADCs
  • MAX1901 - Low-Noise Power-Supply Controllers
  • MAX1902 - Low-Noise Power-Supply Controllers
  • MAX1904 - Low-Noise Power-Supply Controllers

Full PDF Text Transcription

Click to expand full text
19-2290; Rev 2; 3/04 1.5x/2x High-Efficiency White LED Charge Pumps General Description The MAX1910/MAX1912 power LEDs with a regulated output voltage or current (up to 120mA) from an unregulated input supply (2.7V to 5.3V). These are complete DC-DC converters requiring only four small ceramic capacitors and no inductors. Input ripple is minimized by a unique regulation scheme that maintains a fixed 750kHz switching frequency over a wide load range. Also included are logic-level shutdown and soft-start to reduce input current surges at startup. The MAX1910 has two automatically selected operating modes: 1.5x and 2x. 1.5x mode improves efficiency at higher input voltages, while 2x mode maintains regulation at lower input voltages. The MAX1912 operates only in 1.5x mode.
Published: |