datasheet4u.com

900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Maxim Integrated Semiconductor Electronic Components Datasheet

MAX4220 Datasheet

(MAX4212 - MAX4220) Miniature / 300MHz / Single-Supply / Rail-to-Rail Op Amps

No Preview Available !

MAX4220 pdf
19-1178; Rev 1; 6/98
EVFAOLLULAOTWIOSNDKAITTAMSAHNEUEATL
Miniature, 300MHz, Single-Supply,
Rail-to-Rail Op Amps with Enable
General Description
The MAX4212/MAX4213 single, MAX4216 dual,
MAX4218 triple, and MAX4220 quad op amps are
unity-gain-stable devices that combine high-speed per-
formance with rail-to-rail outputs. The MAX4213/
MAX4218 have a disable feature that reduces power-
supply current to 400µA and places the outputs into a
high-impedance state. These devices operate from a
+3.3V to +10V single supply or from ±1.65V to ±5V
dual supplies. The common-mode input voltage range
extends beyond the negative power-supply rail (ground
in single-supply applications).
These devices require only 5.5mA of quiescent supply
current while achieving a 300MHz -3dB bandwidth and
a 600V/µs slew rate. Input voltage noise is only
10nV/Hz and input current noise is only 1.3pA/Hz for
either the inverting or noninverting input. These parts
are an excellent solution in low-power/low-voltage sys-
tems that require wide bandwidth, such as video, com-
munications, and instrumentation. In addition, when
disabled, their high output impedance makes them
ideal for multiplexing applications.
The MAX4212 comes in a miniature 5-pin SOT23 pack-
age, while the MAX4213/MAX4216 come in 8-pin µMAX
and SO packages. The MAX4218/MAX4220 are avail-
able in a space-saving 16-pin QSOP, as well as a
14-pin SO.
Applications
Battery-Powered Instruments
Video Line Driver
Analog-to-Digital Converter Interface
CCD Imaging Systems
Video Routing and Switching Systems
Features
o High Speed:
300MHz -3dB Bandwidth (MAX4212/13)
200MHz -3dB Bandwidth (MAX4216/18/20)
50MHz 0.1dB Gain Flatness (MAX4212/13)
600V/µs Slew Rate
o Single 3.3V/5.0V Operation
o Rail-to-Rail Outputs
o Input Common-Mode Range Extends Beyond VEE
o Low Differential Gain/Phase: 0.02%/0.02°
o Low Distortion at 5MHz:
-78dBc SFDR
-75dB Total Harmonic Distortion
o High Output Drive: ±100mA
o 400µA Shutdown Capability (MAX4213/18)
o High Output Impedance in Off State (MAX4213/18)
o Space-Saving SOT23-5, µMAX, or QSOP Packages
Ordering Information
PART
TEMP.
RANGE
PIN-
PACKAGE
SOT
TOP
MARK
MAX4212EUK -40°C to +85°C 5 SOT23-5 ABAF
MAX4213ESA -40°C to +85°C 8 SO
MAX4213EUA -40°C to +85°C 8 µMAX
Ordering Information continued at end of data sheet.
Typical Operating Circuit
Pin Configuration
RF
24
MAX4212
IN
RTIN
50
RTO
50VOUT
ZO = 50
RO
50
UNITY-GAIN LINE DRIVER
(RL = RO + RTO)
TOP VIEW
OUT 1
VEE 2
IN+ 3
MAX4212
5 VCC N.C. 1
IN- 2
IN+ 3
4 IN- VEE 4
MAX4213
8 EN
7 VCC
6 OUT
5 N.C.
SOT23-5
µMAX/SO
Pin Configurations continued at end of data sheet.
________________________________________________________________ Maxim Integrated Products 1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.
For small orders, phone 1-800-835-8769.


Maxim Integrated Semiconductor Electronic Components Datasheet

MAX4220 Datasheet

(MAX4212 - MAX4220) Miniature / 300MHz / Single-Supply / Rail-to-Rail Op Amps

No Preview Available !

MAX4220 pdf
Miniature, 300MHz, Single-Supply,
Rail-to-Rail Op Amps with Enable
ABSOLUTE MAXIMUM RATINGS
Supply Voltage (VCC to VEE)................................................+12V
IN_-, IN_+, OUT_, EN_ .....................(VEE - 0.3V) to (VCC + 0.3V)
Output Short-Circuit Duration to VCC or VEE ............. Continuous
Continuous Power Dissipation (TA = +70°C)
5-Pin SOT23 (derate 7.1mW/°C above +70°C) ...........571mW
8-Pin SO (derate 5.9mW/°C above +70°C) .................471mW
8-Pin µMAX (derate 4.5mW/°C above +70°C) ............221mW
14-Pin SO (derate 8.3mW/°C above +70°C) ...............667mW
16-Pin QSOP (derate 8.3mW/°C above +70°C) ..........667mW
Operating Temperature Range ...........................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10sec) .............................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or at any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure
to absolute maximum rating conditions for extended periods may affect device reliability.
DC ELECTRICAL CHARACTERISTICS
(VCC = +5V, VEE = 0V, EN_ = +5V, RL = 2kto VCC / 2, VOUT = VCC / 2, TA = TMIN to TMAX, unless otherwise noted. Typical values
are at TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX UNITS
Input Common-Mode
Voltage Range
VCM Guaranteed by CMRR test
VEE -
0.20
VCC -
2.25
V
Input Offset Voltage (Note 1)
MAX4212EUK, MAX421_EUA
VOS MAX42_ _ES_, MAX42_ _EEE
4 12
mV
49
Input Offset Voltage
Temperature Coefficient
TCVOS
8 µV/°C
Input Offset Voltage Matching
Any channels for MAX4216/MAX4218/
MAX4220
±1 mV
Input Bias Current
Input Offset Current
Input Resistance
Common-Mode Rejection Ratio
Open-Loop Gain (Note 1)
Output Voltage Swing
IB
IOS
RIN
CMRR
AVOL
VOUT
(Note 1)
(Note 1)
Differential mode (-1V VIN +1V)
Common mode (-0.2V VCM +2.75V)
(VEE - 0.2V) VCM (VCC - 2.25V)
0.25V VOUT 4.75V, RL = 2k
0.5V VOUT 4.5V, RL = 150
1.0V VOUT 4V, RL = 50
RL = 10k
VCC - VOH
VOL - VEE
RL = 2k
VCC - VOH
VOL - VEE
RL = 150
VCC - VOH
VOL - VEE
RL = 50
VCC - VOH
VOL - VEE
5.4 9.0 µA
0.1 1.0 µA
70 k
3 M
70 100
dB
55 61
52 59
dB
57
0.05
0.05
0.06 0.20
0.06 0.20
0.30 0.50
V
0.30 0.50
0.70
0.60
2 _______________________________________________________________________________________


Part Number MAX4220
Description (MAX4212 - MAX4220) Miniature / 300MHz / Single-Supply / Rail-to-Rail Op Amps
Maker Maxim
Total Page 16 Pages
PDF Download
MAX4220 pdf
MAX4220 Datasheet PDF
[partsNo] view html
View PDF for Mobile








Similar Datasheet

1 MAX4220 (MAX4212 - MAX4220) Miniature / 300MHz / Single-Supply / Rail-to-Rail Op Amps Maxim
Maxim
MAX4220 pdf
2 MAX4221 330MHz Buffered Video Switches/ Crosspoint Building Blocks Maxim
Maxim
MAX4221 pdf
3 MAX4222 High-Speed / Single-Supply / Gain of @ / Closed-Loop / Rail-to-Rail Buffers with Enable Maxim
Maxim
MAX4222 pdf
4 MAX4223 1GHz / Low-Power / SOT23 / Current-Feedback Amplifiers with Shutdown Maxim
Maxim
MAX4223 pdf
5 MAX4224 1GHz / Low-Power / SOT23 / Current-Feedback Amplifiers with Shutdown Maxim
Maxim
MAX4224 pdf
6 MAX4225 1GHz / Low-Power / SOT23 / Current-Feedback Amplifiers with Shutdown Maxim
Maxim
MAX4225 pdf
7 MAX4226 1GHz / Low-Power / SOT23 / Current-Feedback Amplifiers with Shutdown Maxim
Maxim
MAX4226 pdf
8 MAX4227 1GHz / Low-Power / SOT23 / Current-Feedback Amplifiers with Shutdown Maxim
Maxim
MAX4227 pdf
9 MAX4228 1GHz / Low-Power / SOT23 / Current-Feedback Amplifiers with Shutdown Maxim
Maxim
MAX4228 pdf





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy