MAX4385E Datasheet | Maxim Integrated

escription The MAX4385E/MAX4386E op amps are unity-gain stable devices that bine high-speed performance, Rail-to-Rail ® outputs, and ±15k V ESD protection. Targeted for applications where an input or an output is exposed to the outside world, such as video and munications, these devices are pliant with International ESD Standards: ±15k V IEC 1000-4-2 Air Gap Discharge, ±8k V IEC 1000-4-2 Contact Discharge, and the ±15k V Human Body Model. The MAX4385E/MAX4386E operate from a single 5V supply with a mon-mode input voltage range that extends beyond VEE. The MAX4385E/MAX4386E consume only 5.5m A of quiescent supply current per amplifier while achieving a 230MHz -3d B bandwidth, 30MHz 0.1d B gain flatness and a 450V/µs slew rate. Features o ESD-Protected Inputs and Outputs ±15k V- Human Body Model ±8k V- IEC 1000-4-2 Contact Discharge ±15k V- IEC 1000-4-2 Air-Gap Discharge o Low Cost and High Speed 230MHz -3d B Bandwidth 30MHz 0.1d B Gain Flatness 450V/µs Slew Rate o Rail-to-Rail Outputs o Input mon-Mode Range Extends Beyond VEE o Low Differential Gain/Phase: 0.02%/0.01° o Low Distortion at 5MHz -60d Bc SFDR -58d B Total Harmonic Distortion o Ultra-Small 5-Pin SOT23 and 14-Pin TSSOP Packages Applications Set-Top Boxes Surveillance Video Systems Battery-Powered Instruments Analog-to-Digital Converter Interface CCD Imaging Systems Video Routing and Switching Systems Digital Cameras Video-on-Demand Video Line Driver Ordering Information PART MAX4385EEUK-T MAX4386EESD MAX4386EEUD TEMP RANGE -40°C to +85°C -40°C to +85°C -40°C to +85°C PINPACKAGE 5 SOT23-5 14 SO 14 TSSOP TOP MARK ADZL - - Typical Operating Circuit 5V 2.2µF Pin Configurations TOP VIEW OUT 1 5 VCC IN 75Ω MAX4385E 75Ω Zo = 75Ω OUT VEE 2 75Ω IN+ 3 4 IN- 220Ω 220Ω SOT23 VIDEO LINE DRIVER Pin Configurations continued at end of data sheet. Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd. ________________________________________________________________ Maxim Integrated Products 1 For pricing,...