MAX477 Datasheet | Maxim Integrated

Description The MAX477 is a ±5V wide-bandwidth, fast-settling, unity-gain-stable op amp featuring low noise, low differential gain and phase errors, high slew rate, high precision, and high output current. The MAX477’s architecture uses a standard voltage-feedback topology that can be configured into any desired gain setting, as with other general-purpose op amps. Unlike high-speed amplifiers using current-mode feedback architectures, the MAX477 has a unique input stage that bines the benefits of the voltage-feedback design (flexibility in choice of feedback resistor, two high-impedance inputs) with those of the currentfeedback design (high slew rate and full-power bandwidth). It also has the precision of voltage-feedback amplifiers, characterized by low input-offset voltage and bias current, low noise, and high mon-mode and power-supply rejection. The MAX477 is ideally suited for driving 50Ω or 75Ω loads. Available in DIP, SO, space-saving µMAX, and SOT23 packages. ________________________Applications Broadcast and High-Definition TV Systems Video Switching and Routing munications Medical Imaging Precision DAC/ADC Buffer ______________Ordering Information PART MAX477EPA MAX477ESA MAX477EUA MAX477EUK-T MAX477MJA TEMP. RANGE -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C -55°C to +125°C PINPACKAGE 8 Plastic DIP 8 SO 8 µMAX 5 SOT23 8 CERDIP SOT TOP MARK - - - ABYW - __________Typical Operating Circuit __________________Pin Configuration TOP VIEW VIN 75Ω 75Ω VOUT OUT 1 75Ω 5 VCC N.C. 1 IN- 2 VEE 2 IN+ 3 4 INVEE 4 8 7 6 5 N.C. VCC OUT N.C. 500Ω 500Ω IN+ 3 VIDEO/RF CABLE DRIVER SOT23-5 DIP/SO/µMAX ________________________________________________________________ Maxim Integrated Products For free samples & the latest literature: http://.maxim-ic., or phone 1-800-998-8800. For small orders, phone 408-737-7600 ext. 3468. 300MHz High-Speed Op Amp MAX477 ABSOLUTE MAXIMUM RATINGS Supply Voltage (VCC to VEE)...