Datasheet4U Logo Datasheet4U.com

MAX5116 - Nonvolatile - Quad 8-Bit DACs with 2-Wire Serial Interface

This page provides the datasheet information for the MAX5116, a member of the MAX5115 Nonvolatile - Quad 8-Bit DACs with 2-Wire Serial Interface family.

Description

The MAX5115/MAX5116 quad, 8-bit, digital-to-analog converters (DACs) feature nonvolatile registers.

These nonvolatile registers store the DAC operating modes and output states, allowing the DACs to initialize to specified configurations at power-up.

Features

  • Nonvolatile Registers Initialize DACs to Stored States.
  • +2.7V to +5.25V Single-Supply Operation.
  • Quad 8-Bit DACs with Independent High and Low Reference Inputs.
  • Rail-to-Rail Output Buffers.
  • Low 200µA per DAC Supply Current.
  • Power-Down Mode Reduces Supply Current to 25µA (max).
  • 400kHz, I2C-Compatible, 2-Wire Serial Interface.
  • Asynchronous MUTE Input (MAX5116).
  • Small 16-/20-Pin QSOP Packages MAX5115/MAX5116 Orderin.

📥 Download Datasheet

Datasheet preview – MAX5116

📁 Similar Datasheet

  • MAX5113 - 14-Bit Current DAC (Maxim Integrated)
  • MAX5109 - 8-Bit DACs (Maxim Integrated Products)
  • MAX5121 - Serial Voltage-Output DACs (Maxim Integrated)
  • MAX5123 - Force/Sense DACs (Maxim Integrated)
  • MAX5128 - Linear-Taper Digital Potentiometer (Maxim Integrated Products)
  • MAX5131 - Voltage-output DACs (Maxim Integrated Products)
  • MAX5133 - Force/sense DACs (Maxim Integrated Products)
  • MAX5134 - Voltage-Output DACs (Maxim Integrated Products)
  • MAX5135 - Voltage-Output DACs (Maxim Integrated Products)
  • MAX5136 - Voltage-Output DACs (Maxim Integrated Products)
Other Datasheets by Maxim
  • MAX5115 - Nonvolatile - Quad 8-Bit DACs with 2-Wire Serial Interface
  • MAX510 - Quad / Serial 8-Bit DACs
  • MAX5100 - +2.7V to +5.5V / Low-Power / Quad / Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs
  • MAX5101 - +2.7V to +5.5V / Low-Power / Triple / Parallel 8-Bit DAC
  • MAX5102 - +2.7V to +5.5V / Low-Power / Dual / Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs
  • MAX5104 - Low-Power / Dual / Voltage-Output / 12-Bit DAC with Serial Interface
  • MAX5105 - Nonvolatile / Quad / 8-Bit DACs
  • MAX5106 - Nonvolatile / Quad / 8-Bit DACs

Full PDF Text Transcription

Click to expand full text
19-3586; Rev 0; 2/05 www.DataSheet4U.com Nonvolatile, Quad, 8-Bit DACs with 2-Wire Serial Interface General Description The MAX5115/MAX5116 quad, 8-bit, digital-to-analog converters (DACs) feature nonvolatile registers. These nonvolatile registers store the DAC operating modes and output states, allowing the DACs to initialize to specified configurations at power-up. Precision on-chip output buffers swing rail-to-rail, and provide 8µs settling time. The I2C*-compatible, 2-wire serial interface allows for a maximum clock frequency of 400kHz. The MAX5115 has independent high and low reference inputs allowing maximum output voltage range flexibility. The MAX5116 has single high and low reference inputs for all DACs to minimize trace count and save board space.
Published: |