MAX5460 Datasheet PDF (32-Tap FleaPoT / 2-Wire Digital Potentiometers)

MAX5460 - 32-Tap FleaPoT / 2-Wire Digital Potentiometers

This page provides the datasheet information for the MAX5460, a member of the MAX 32-Tap FleaPoT / 2-Wire Digital Potentiometers family.

Description

The MAX5460

MAX5468 linear-taper digital potentiometers perform the same function as a mechanical potentiometer or a variable resistor.

These devices consist of a fixed resistor and a wiper contact with 32-tap points that are digitally controlled through a 2-wire serial interface.

Features

Miniature SC70 and SOT23 Packages.
0.3µA Ultra-Low Supply Current.
+2.7V to +5.5V Single-Supply Operation.
Glitchless Switching Between Resistor Taps.
Power-On Reset to Midscale.
2-Wire Up/Down Serial Interface.
10kΩ, 50kΩ, and 100kΩ Resistance Values Ordering Information PART PIN- TOP.

Datasheet Details

Part number	MAX5460
Manufacturer	Maxim
File Size	233.69 KB
Description	32-Tap FleaPoT / 2-Wire Digital Potentiometers
Datasheet	MAX5460 Datasheet
Additional preview pages of the MAX5460 datasheet.

📁 Similar Datasheet

MAX5406 - Audio Processor (Maxim Integrated Products)

MAX5409 - Log Taper Digital Potentiometers (Maxim Integrated)

MAX5410 - Log Taper Digital Potentiometers (Maxim Integrated)

MAX5414 - Digital Potentiometers (Maxim Integrated)

MAX5417 - 256-Tap Nonvolatile I2C-Interface Digital Potentiometers (Maxim Integrated Products)

MAX5418 - 256-Tap Nonvolatile I2C-Interface Digital Potentiometers (Maxim Integrated Products)

MAX5419 - 256-Tap Nonvolatile I2C-Interface Digital Potentiometers (Maxim Integrated Products)

MAX5420 - Digitally Programmable Precision Voltage Divider (Maxim Integrated Products)

MAX5421 - Digitally Programmable Precision Voltage Divider (Maxim Integrated Products)

MAX5422 - Digital Potentiometers (Maxim Integrated Products)

Full PDF Text Transcription

Click to expand full text

MAX5460–MAX5468 19-1956; Rev 3; 11/05 32-Tap FleaPoT™, 2-Wire Digital Potentiometers General Description The MAX5460–MAX5468 linear-taper digital potentiometers perform the same function as a mechanical potentiometer or a variable resistor. These devices consist of a fixed resistor and a wiper contact with 32-tap points that are digitally controlled through a 2-wire serial interface. The MAX5462/MAX5465/MAX5468 are configured as potentiometers. The rest of the devices in this family are configured as variable resistors. See Pin Configurations for part functionality. Three resistance values are available: 10kΩ (MAX5466/ MAX5467/MAX5468), 50kΩ (MAX5463/MAX5464/ MAX5465), and 100kΩ (MAX5460/MAX5461/MAX5462).

Published: Apr 29, 2005 |