MAX5804 Datasheet | Maxim Integrated

Description The MAX5803/MAX5804/MAX5805 single-channel, lowpower, 8-/10-/12-bit, voltage-output digital-to-analog converters (DACs) include output buffers and an internal reference that is selectable to be 2.048V, 2.500V, or 4.096V. The MAX5803/MAX5804/MAX5805 accept a wide supply voltage range of 2.7V to 5.5V with extremely low power (< 1m W) consumption to acmodate most low-voltage applications. A precision external reference input allows rail-to-rail operation and presents a 100k I (typ) load to an external reference. The MAX5803/MAX5804/MAX5805 have an I 2Cpatible, 2-wire interface that operates at clock rates up to 400k Hz. The DAC output is buffered and has a low supply current of 155FA (typical at 3V) and a low offset error of Q0.5m V (typical). On power-up, the MAX5803/MAX5804/MAX5805 reset the DAC outputs to zero, providing additional safety for applications that drive valves or other transducers which need to be off on power-up. The internal reference is initially powered down to allow use of an external reference. The MAX5803/MAX5804/MAX5805 include a userconfigurable active-low asynchronous input, AUX for additional flexibility. This input can be programmed to asynchronously clear (CLR) or temporarily gate (GATE) the DAC output to a user-programmable value. A dedicated active-low asynchronous LDAC input is also included. This allows simultaneous output updates of multiple devices. The MAX5803/MAX5804/MAX5805 are available in 10-pin TDFN/µMAXM packages and are specified over the -40NC to +125NC temperature range. Benefits and Features S Single High-Accuracy DAC Channel - 12-Bit Accuracy Without Adjustments - ±1 LSB INL Buffered Voltage Output - Guaranteed Monotonic Over All Operating Conditions S Three Precision Selectable Internal References - 2.048V, 2.500V, or 4.096V S Internal Output Buffer - Rail-to-Rail Operation with External Reference - 6.3µs Settling Time - Output Directly Drives 2k I Loads S Small, 10-Pin, 2mm x 3mm TDFN and 3mm x 5mm µMAX...