900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Maxim Integrated Semiconductor Electronic Components Datasheet

DS1088L Datasheet

Fixed-Frequency EconOscillator

No Preview Available !

DS1088L
Fixed-Frequency EconOscillator™
General Description
The DS1088L is a low-cost clock generator that pro-
duces a square-wave output without external timing
components. The fixed-frequency oscillator is available in
factory-calibrated frequencies from 312kHz to 133MHz.
The device has a power-down pin for power-sensitive
applications.
Applications
● Printers
● Copiers
● Computer Peripherals
● POS Terminals
● Cable Modems
Ordering Information appears at end of data sheet.
Features
● Factory-Programmed Square-Wave Generator from
321kHz to 133MHz
● Single Output
● No External Timing Components Required
● 2.7V to 3.6V Supply
● Power-Down Mode
● 1% Frequency Tolerance Over Temperature and
Voltage
● Wide Temperature Range (-20°C to +85°C)
Typical Operating Circuit
312kHz TO 133MHz
OUTPUT
VCC
OUT DNC
DS1088L
VCC DNC
VCC PDN
GND GND
VCC
DECOUPLING CAPACITORS
(0.1µF AND 0.01µF)
EconOscillator is a trademark of Maxim Integrated Products, Inc.
For related parts and recommended products to use with this part, refer
to www.maximintegrated.com/DS1088L.related.
19-6184; Rev 3; 4/15


Maxim Integrated Semiconductor Electronic Components Datasheet

DS1088L Datasheet

Fixed-Frequency EconOscillator

No Preview Available !

DS1088L
Fixed-Frequency EconOscillator™
Absolute Maximum Ratings
(Voltages relative to ground.)
Voltage Range on VCC..........................................-0.5V to +6.0V
Voltage Range on PDN............................-0.5V to (VCC + 0.5V)*
Operating Temperature Range............................ -20°C to +85°C
Storage Temperature Range............................. -55°C to +125°C
Lead Temperature (soldering, 10s).................................. +300°C
Soldering Temperature (reflow)........................................+260°C
*Not to exceed +6.0V.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these
or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
Recommended Operating Conditions
(TA = -20°C to +85°C, unless otherwise noted.)
PARAMETER
Supply Voltage
High-Level Input Voltage (PDN)
Low-Level Input Voltage (PDN)
SYMBOL
VCC
VIH
VIL
(Note 1)
CONDITIONS
MIN TYP MAX UNITS
2.7 3.6 V
0.7 x VCC
-0.3
VCC + 0.3
0.3 x VCC
V
V
DC Electrical Characteristics
(VCC = 2.7V to 3.6V, TA = -20°C to +85°C, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
High-Level Output Voltage (OUT)
Low-Level Output Voltage (OUT)
High-Level Input Current (PDN)
Low-Level Input Current (PDN)
Supply Current (Active)
Standby Current (Power-Down)
VOH
VOL
IIH
IIL
ICC
ICCQ
IOH = -4mA, VCC = MIN
IOL = 4mA
VCC = 3.6V
VIL = 0V
VCC = 3.6V, CL = 15pF, fO = 133MHz
Power-down mode
MIN TYP
VCC - 0.4
-1
15
MAX
0.4
1
24
10
UNITS
V
V
µA
µA
mA
µA
www.maximintegrated.com
Maxim Integrated 2


Part Number DS1088L
Description Fixed-Frequency EconOscillator
Maker Maxim Integrated
PDF Download

DS1088L Datasheet PDF






Similar Datasheet

1 DS1088C Fixed-Frequency EconoOscillator
Maxim Integrated Products
2 DS1088E Fixed-Frequency EconOscillator
Maxim Integrated
3 DS1088L Fixed-Frequency EconOscillator
Maxim Integrated





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy