Datasheet4U Logo Datasheet4U.com

DS1100 - 5-Tap Economy Timing Element

General Description

The DS1100 series delay lines have five equally spaced taps providing delays from 4ns to 500ns.

These devices are offered in surface-mount packages to save PCB area.

Key Features

  • All-Silicon Timing Circuit.
  • Five Taps Equally Spaced.
  • 5V Operation.
  • Delays are Stable and Precise.
  • Both Leading- and Trailing-Edge Accuracy.
  • Improved Replacement for DS1000.
  • Low-Power CMOS.
  • TTL/CMOS-Compatible.
  • Vapor-Phase, IR, and Wave Solderable.
  • Custom Delays Available.
  • Fast-Turn Prototypes.
  • Delays Specified Over Both Commercial and Industrial Temperature Ranges PIN.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS1104SG Rectifier Diode Dynex Semiconductor
DS1107SG Rectifier Diode Dynex Semiconductor
DS1109SG Rectifier Diode Dynex Semiconductor
DS110DF111 2-Channel Retimer Texas Instruments
DS110DF1610 8.5- to 11.3-Gbps 16-Channel Retimer Texas Instruments

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
DS1100L 3.3V 5-Tap Economy Timing Element
DS1135 3V 3-in-1 High-Speed Silicon Delay Line
DS1135L 3V 3-in-1 High-Speed Silicon Delay Line
DS1075 3.3V and 5.0V MicroMonitor
DS1085 EconOscillator Frequency Synthesizer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-5735; Rev 3/11 DS1100 5-Tap Economy Timing Element (Delay Line) GENERAL DESCRIPTION The DS1100 series delay lines have five equally spaced taps providing delays from 4ns to 500ns. These devices are offered in surface-mount packages to save PCB area. Low cost and superior reliability over hybrid technology is achieved by the combination of a 100% silicon delay line and industry-standard µMAX and SO packaging. The DS1100 5-tap silicon delay line reproduces the input-logic state at the output after a fixed delay as specified by the extension of the part number after the dash. The DS1100 is designed to reproduce both leading and trailing edges with equal precision. Each tap can drive up to 10 74LS loads. Maxim can customize standard products to meet special needs.