Datasheet4U Logo Datasheet4U.com

DS1318 - Parallel-Interface Elapsed Time Counter

Description

The DS1318 parallel-interface elapsed time counter (ETC) is a 44-bit counter that maintains the amount of time that the device operates from main and/or backup power or during an external event.

Features

  • Byte-Wide Parallel Interface.
  • 44-Bit Binary Counter Provides Timer with 244µs Resolution.
  • Automatic Power-Fail Detect and Switch Circuitry Selects Power Source from the Primary Power and the Battery, and Write Protects the Internal Registers.
  • Internal Power-Fail Circuit Allows Timer to Provide Primary or Battery Operation Times.
  • Timer can Alternately Provide an Event Timer of Either an Active-High or Active-Low Pulse.
  • Interrupt Output Genera.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS1314 3V Nonvolatile Controller ART CHIP
DS1300-3 AC-DC / Distributed Power Front-End 2U Emerson
DS1302 Trickle Charge Timekeeping Chip TGS
DS1307 64 X 8 Serial Real Time Clock TGS
DS1307 Real-Time Clock Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
DS1312 Nonvolatile Controller
DS1314 3V Nonvolatile Controller
DS1315 Phantom Time
DS1302 Trickle-Charge Timekeeping Chip
DS1305 Serial Alarm Real-Time Clock

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-5664; Rev 1; 12/10 Parallel-Interface Elapsed Time Counter DS1318 General Description The DS1318 parallel-interface elapsed time counter (ETC) is a 44-bit counter that maintains the amount of time that the device operates from main and/or backup power or during an external event. The internal frequency of the counter clock is 4.096kHz, which provides a 244µs resolution and a maximum count of over 136 years. A built-in power-sense circuit detects power failures, automatically switches to the backup supply, and controls the timer. If an external event timer is desired, the control input EXT can control the counter operation. An open-drain output provides an interrupt, and a square-wave output provides a programmable square wave.
Published: |