Datasheet4U Logo Datasheet4U.com

DS1707 - 3.3/5.0-Volt MicroMonitor

Description

PBRST VCC GND IN - Pushbutton Reset Input - Power Supply - Ground - Input NMI - Non-maskable Interrupt NC - No Connect RST - Active Low Reset Output RST - Active High Reset Output DESCRIPTION The DS1707/DS1708 3.3- or 5.0-Volt MicroMonitor monitors three vital conditions for a microprocessor: p

Features

  • Holds microprocessor in check during power transients.
  • Automatically restarts microprocessor after power failure.
  • Monitors pushbutton for external override.
  • Accurate 5%, 10% or 20% resets for 3.3V systems and 5% or 10% resets for 5.0V systems.
  • Eliminates the need for discrete components.
  • 20% tolerance compatible with 3.0V systems.
  • Pin compatible with the MAXIM MAX707/MAX708 in 8-pin DIP, 8-pin SOIC packages.
  • 8-pin DIP, 8-pin and m-SOP SOIC and 8-pin m-SOP.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS1705 3.3 and 5.0 Volt MicroMonitor Dallas
DS1706 3.3 and 5.0 Volt MicroMonitor Dallas
DS17-08A Rectifier Diode IXYS
DS17-12A Rectifier Diode IXYS
DS1710 Partitioned NV Controller Dallas

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
DS1706 3.3V and 5.0V MicroMonitor
DS1708 3.3/5.0-Volt MicroMonitor
DS1726 High-Precision 3-Wire Digital Thermometer/Thermostat
DS1775 Digital Thermometer and Thermostat
DS1075 3.3V and 5.0V MicroMonitor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.maxim-ic.com DS1707/DS1708 3.3 and 5.0-Volt MicroMonitor FEATURES § Holds microprocessor in check during power transients § Automatically restarts microprocessor after power failure § Monitors pushbutton for external override § Accurate 5%, 10% or 20% resets for 3.3V systems and 5% or 10% resets for 5.0V systems § Eliminates the need for discrete components § 20% tolerance compatible with 3.
Published: |