900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Maxim Integrated Semiconductor Electronic Components Datasheet

DS1920 Datasheet

Temperature iButton

No Preview Available !

19-4886; Rev 8/09
SPECIAL FEATURES
Digital Thermometer Measures Temperatures
from -55°C to +100°C in Typically 0.2s
Zero Standby Power
0.5°C Resolution, Digital Temperature
Reading is Two’s Complement of °C Value
Access to Internal Counters Allows
Increased Resolution Through Interpolation
Reduces control, Address, Data, and Power
to a Single Data Contact
8-Bit Device-Generated CRC for Data
Integrity
8-Bit Family Code Specifies DS1920
Communications Requirements to Reader
Special Command Set Allows User to Skip
ROM Section and Perform Temperature
Measurements Simultaneously for All
Devices on the Bus
2 Bytes of EEPROM to Be Used Either as
Alarm Triggers or User Memory
Alarm Search Directly Indicates Which
Device Senses Alarming Temperatures
ORDERING INFORMATION
PART
PIN-PACKAGE
DS1920-F5+
F5 MicroCAN
+Denotes a lead(Pb)-free/RoHS-compliant package.
F5 MicroCAN
5.89
0.51
16.25
A0 10
000000FBC52B
1-Wire
17.35
DS1920
Temperature iButton
COMMON iButton FEATURES
Unique, Factory-Lasered and Tested 64-Bit
Registration Number (8-Bit Family Code +
48-Bit Serial Number + 8-Bit CRC Tester)
Assures Absolute Traceability Because No
Two Parts Are Alike
Multidrop Controller for MicroLAN
Digital Identification and Information by
Momentary Contact
Chip-Based Data Carrier Compactly Stores
Information
Data Can Be Accessed While Affixed To
Object
Economically Communicates to Bus Master
with a Single Digital Signal at 16.3kbps
Standard 16mm Diameter and 1-Wire
Protocol Ensure Compatibility with iButton
Family
Button Shape is Self-Aligning with Cup-
Shaped Probes
Durable Stainless Steel Case Engraved with
Registration Number Withstands Harsh
Environments
Easily Affixed with Self-Stick Adhesive
Backing, Latched by Its Flange, or Locked
with a Ring Pressed Onto Its Rim
Presence Detector Acknowledges When
Reader First Applies Voltage
EXAMPLES OF ACCESSORIES
DS9096P
Self-Stick Adhesive Pad
DS9101
Multipurpose Clip
DS9093RA
Mounting Lock Ring
DS9093F
Snap-In Fob
DS9092
iButton Probe
DATA GROUND
ALL DIMENSIONS ARE SHOWN IN MILLIMETERS.
iButton and 1-Wire are registered trademarks of Maxim Integrated
Products, Inc.
1 of 22


Maxim Integrated Semiconductor Electronic Components Datasheet

DS1920 Datasheet

Temperature iButton

No Preview Available !

DS1920
iButton DESCRIPTION
The DS1920 Temperature iButton provides 9-bit temperature readings, which indicate the temperature of
the device. Information is sent to/from the DS1920 over a 1-Wire interface. Power for reading, writing,
and performing temperature conversions is derived from the data line itself. Because each DS1920
contains a unique silicon serial number, multiple DS1920s can exist on the same 1-Wire bus. This allows
for placing temperature sensors in many different places. Applications where this feature is useful include
HVAC environmental controls, sensing temperatures inside buildings, equipment or machinery, and in
process monitoring and control.
OVERVIEW
The block diagram of Figure 1 shows the major components of the DS1920. The DS1920 has three main
data components: 1) 64-bit lasered ROM, 2) temperature sensor, and 3) nonvolatile temperature alarm
triggers TH and TL. The device derives its power from the 1-Wire communication line by storing energy
on an internal capacitor during periods of time when the signal line is high and continues to operate off
this power source during the low times of the 1-Wire line until it returns high to replenish the parasite
(capacitor) supply.
Communication to the DS1920 is via a 1-Wire port. With the 1-Wire port, the memory and control
functions will not be available before the ROM function protocol has been established. The master must
first provide one of five ROM function commands: 1) Read ROM, 2) Match ROM, 3) Search ROM, 4)
Skip ROM, or 5) Alarm Search. These commands operate on the 64-bit lasered ROM portion of each
device and can single out a specific device if many are present on the 1-Wire line as well as indicate to
the bus master how many and what types of devices are present. After a ROM function sequence has been
successfully executed, the memory and control functions are accessible and the master may then provide
any one of the five memory and control function commands.
One control function command instructs the DS1920 to perform a temperature measurement. The result
of this measurement will be placed in the DS1920’s scratchpad memory, and may be read by issuing a
memory function command, which reads the contents of the scratchpad memory. The temperature alarm
triggers TH and TL consist of 1 byte of EEPROM each. If the alarm search command is not applied to the
DS1920, these registers may be used as general-purpose user memory. Writing TH and TL is done using
a memory function command. Read access to these registers is through the scratchpad. All data is read
and written least significant bit first.
2 of 22


Part Number DS1920
Description Temperature iButton
Maker Maxim Integrated
Total Page 22 Pages
PDF Download

DS1920 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 DS1920 Temperature iButton
Maxim Integrated
2 DS1920 Temperature iButton
Dallas Semiconductor
3 DS1921G Thermochron iButton Device
Maxim Integrated
4 DS1921G Thermochron iButton
Dallas Semiconductor
5 DS1921H High-Resolution Thermochron iButton Devices
Maxim Integrated
6 DS1921H High-Resolution Thermochron iButton
Dallas Semiconducotr
7 DS1921L-F5X Thermochron iButton
Maxim Integrated
8 DS1921L-F5X Thermochron iButton
Dallas Semiconducotr
9 DS1921Z High-Resolution Thermochron iButton
Dallas Semiconducotr





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy