Datasheet4U Logo Datasheet4U.com

DS1922L - iButton Temperature Loggers

Description

The iButton® temperature loggers (DS1922L/DS1922T) are rugged, self-sufficient systems that measure temperature and record the result in a protected memory section.

The recording is done at a user-defined rate.

📥 Download Datasheet

📁 Similar Datasheet

  • DS1923-F5 - Hygrochron Temperature/Humidity Logger iButton with 8kB Data Log Memory (Dallas Semiconducotr)
  • DS19310 - (DS19310 / DS19320) Color TV Manual (Sanyo)
  • DS19320 - (DS19310 / DS19320) Color TV Manual (Sanyo)
  • DS1961S - 1kb Protected EEPROM iButton With SHA-1 Engine (Dallas Semiconducotr)
  • DS1963L - 4k-BIT MONETARY iButton (Dallas Semiconductor)
  • DS1963S - SHA iButton (Dallas Semiconducotr)
  • DS1971 - 256-Bit EEPROM iButton (Dallas Semiconducotr)
  • DS1972 - 1024-Bit EEPROM iButton (Maxim Integrated Products)
  • DS1973 - 4-kbit EEPROM iButton (Dallas Semiconducotr)
  • DS1976 - Shielded Drum Core Inductors (Tyco Electronics)
Other Datasheets by Maxim Integrated
  • DS1922T - iButton Temperature Loggers
  • DS1920 - Temperature iButton
  • DS1921G - Thermochron iButton Device
  • DS1921H - High-Resolution Thermochron iButton Devices
  • DS1921L-F5X - Thermochron iButton
  • DS1921Z - High-Resolution Thermochron iButton Devices
  • DS1923 - iButton Hygrochron Temperature/Humidity Logger
  • DS1925 - iButton High-Capacity Temperature Logger

Full PDF Text Transcription

Click to expand full text
DS1922L/DS1922T iButton Temperature Loggers with 8KB Datalog Memory General Description The iButton® temperature loggers (DS1922L/DS1922T) are rugged, self-sufficient systems that measure temperature and record the result in a protected memory section. The recording is done at a user-defined rate. A total of 8192 8-bit readings or 4096 16-bit readings, taken at equidistant intervals ranging from 1s to 273hr, can be stored. Additionally, 512 bytes of SRAM store applicationspecific information and 64 bytes store calibration data. A mission to collect data can be programmed to begin immediately, after a user-defined delay, or after a temperature alarm. Access to the memory and control functions can be password protected.
Published: |