Datasheet4U Logo Datasheet4U.com

DS2502-E48 - 48-Bit Node Address

Description

The DS2502-E48 is a variant of the DS2502 1024-bit add-only memory.

It differs from the standard DS2502 in its custom ROM family code 89h, and the UniqueWare Identifier 5E7h in place of the upper 12 bits of the standard ROM serialization field.

Features

  • Factory programmed 48-bit node address chip with 768 bits user-programmable.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS2502-UNW UniqueWare Add-Only Memory Dallas Semiconductor
DS2502 1Kbit Add?Only Memory Dallas Semiconducotr
DS2501 1A VERY LOW DROPOUT VOLTAGE REGULATORS Advanced Monolithic Systems
DS2501 512-Bit Add-Only Memory Dallas Semiconductor
DS2505 16-kbit Add-Only Memory Dallas Semiconducotr

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
DS2502-E64 IEEE EUI-64 Node Address
DS2502 1Kb Add-Only Memory
DS2501 512-Bit Add-Only Memory
DS2505 16Kb Add-Only Memory
DS21348 3.3V E1/T1/J1 Line Interface

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-5071; 12/09 DS2502-E48 48-Bit Node Address Chip www.maxim-ic.com FEATURES  Factory programmed 48-bit node address chip with 768 bits user-programmable OTPEPROM communicates with the economy of one signal plus ground  Provides valid MAC-48/EUI-48 Ethernet address  Unique, factory lasered and tested 64-bit registration number assures absolute traceability because no two parts are alike  Built-in multidrop controller ensures compatibility with other 1-Wire® products  Device is an “add-only” memory where additional data can be programmed into EPROM without disturbing existing data  Reduces control, address, data, power and programming signals to a single pin  Directly connects to a single port pin of a microprocessor and communicates at up to 16.
Published: |