Datasheet4U Logo Datasheet4U.com

MAX1058 - Multichannel ADCs/DACs

Download the MAX1058 datasheet PDF. This datasheet also covers the MAX1020 variant, as both devices belong to the same multichannel adcs/dacs family and are provided as variant models within a single manufacturer datasheet.

Description

The MAX1020/MAX1022/MAX1057/MAX1058 integrate a multichannel, 10-bit, analog-to-digital converter (ADC) and an octal, 10-bit, digital-to-analog converter (DAC) in a single IC.

Features

  • such as an internal ±1°C accurate temperature sensor,.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX1020-MaximIntegrated.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX105 Dual / 6-Bit / 800Msps ADC with On-Chip / Wideband Input Amplifier Maxim
MAX100 250Msps / 8-Bit ADC with Track/Hold Maxim
MAX1002 Low-Power / 60Msps / Dual / 6-Bit ADC Maxim
MAX1003 Low-Power / 90Msps / Dual 6-Bit ADC Maxim
MAX1005 IF Undersampler Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX1057 Multichannel ADCs/DACs
MAX1020 Multichannel ADCs/DACs
MAX1022 Multichannel ADCs/DACs
MAX1036 4-/12-Channel 2-Wire Serial 8-Bit ADCs
MAX1037 4-/12-Channel 2-Wire Serial 8-Bit ADCs

Full PDF Text Transcription

Click to expand full text
19-3280; Rev 5; 2/12 EVAALVUAAILTAIOBNLEKIT 10-Bit, Multichannel ADCs/DACs with FIFO, Temperature Sensing, and GPIO Ports MAX1020/MAX1022/MAX1057/MAX1058 General Description The MAX1020/MAX1022/MAX1057/MAX1058 integrate a multichannel, 10-bit, analog-to-digital converter (ADC) and an octal, 10-bit, digital-to-analog converter (DAC) in a single IC. These devices also include a temperature sensor and configurable general-purpose I/O ports (GPIOs) with a 25MHz SPI-/QSPI™-/MICROWIRE®-compatible serial interface. The ADC is available in 8/12/16 inputchannel versions. The octal DAC outputs settle within 2.0µs, and the ADC has a 225ksps conversion rate. All devices include an internal reference (2.5V or 4.096V) providing a well-regulated, low-noise reference for both the ADC and DAC.
Published: |