Datasheet4U Logo Datasheet4U.com

MAX16132 - Single/Dual/Triple/Quad-Voltage uP Supervisors

Description

The MAX16132

MAX16135 are low-voltage, ±1% accurate, single, dual, triple, and quad-volta­ ge μP supervisors that monitor up to 4 system-supply voltages for undervoltage and overvoltage faults.

MAX16134 feature independent reset outputs, while the MAX16135

Features

  • dual reset outputs. For the MAX16132.
  • MAX16134, a reset output asserts when the voltage at its corresponding input falls outside a factory-trimmed undervoltage and overvoltage window threshold. The reset is maintained for a minimum timeout period after voltage at the input falls within the factory-set window threshold. For the MAX16135, a reset output asserts when either, or both, of the corresponding inputs fall outside the factory-trimmed undervoltage and overvoltage window thresholds.

📥 Download Datasheet

📁 Similar Datasheet

  • MAX1613 - Bridge-Battery Backup Controller (Maxim)
  • MAX161 - CMOS 8-Bit 8Channel Data Acquisition System (Maxim)
  • MAX1610 - Digitally Controlled CCFL Backlight Power Supplies (Maxim)
  • MAX1611 - Digitally Controlled CCFL Backlight Power Supplies (Maxim)
  • MAX1612 - Bridge-Battery Backup Controller (Maxim)
  • MAX16126 - Load-Dump/Reverse-Voltage Protector (Maxim Integrated Products)
  • MAX16127 - Load-Dump/Reverse-Voltage Protector (Maxim Integrated Products)
  • MAX1614 - High-Side / N-Channel MOSFET Switch Driver (Maxim)
  • MAX1615 - Low-Power Linear Regulators (Maxim)
  • MAX16165 - 4-Channel Sequencer and Superviso (Analog Devices)
Other Datasheets by Maxim Integrated
  • MAX16133 - Single/Dual/Triple/Quad-Voltage uP Supervisors
  • MAX16134 - Single/Dual/Triple/Quad-Voltage uP Supervisors
  • MAX16135 - Single/Dual/Triple/Quad-Voltage uP Supervisors
  • MAX16136 - High-Precision Supervisory
  • MAX16122 - Dual Pushbutton Controllers
  • MAX16123 - Dual Pushbutton Controllers
  • MAX16124 - Dual Pushbutton Controllers
  • MAX16125 - Dual Pushbutton Controllers

Full PDF Text Transcription

Click to expand full text
MAX16132–MAX16135 Low-Voltage, Precision, Single/Dual/Triple/ Quad-Voltage μP Supervisors General Description The MAX16132–MAX16135 are low-voltage, ±1% accurate, single, dual, triple, and quad-volta­ ge μP supervisors that monitor up to 4 system-supply voltages for undervoltage and overvoltage faults. The MAX16132–MAX16134 feature independent reset outputs, while the MAX16135 features dual reset outputs. For the MAX16132–MAX16134, a reset output asserts when the voltage at its corresponding input falls outside a factory-trimmed undervoltage and overvoltage window threshold. The reset is maintained for a minimum timeout period after voltage at the input falls within the factory-set window threshold.
Published: |