Datasheet4U Logo Datasheet4U.com

MAX16150 - nanoPower Pushbutton On/Off Controller

Description

The MAX16150A/MAX16150B are extremely low-power, pushbutton, on/off controllers with a switch debouncer and built-in latch.

Features

  • Low Power.
  • 20nA (Max) Standby Current.
  • Debounces Noisy Switches.
  • 50ms and 2s Debounce Timing Options.
  • 8s and 16s Shutdown Timing Periods.
  • Latched Output Supplies 20mA Load Current With Less Than 100mV Drop.
  • One-Shot INT Output on Each Switch Closure.
  • 32ms INT Duration.
  • Pushbutton Input Handles Up to ±60V.
  • ±15kV HBM ESD Protection.
  • SOT23-6 and 1mm x 1.5mm, 6-bump WLPs Ordering Information appears at end of data sheet. 19-100466;.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1615 Low-Power Linear Regulators Maxim
MAX161 CMOS 8-Bit 8Channel Data Acquisition System Maxim
MAX1610 Digitally Controlled CCFL Backlight Power Supplies Maxim
MAX1611 Digitally Controlled CCFL Backlight Power Supplies Maxim
MAX1612 Bridge-Battery Backup Controller Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX16152 nanoPower Supervisor and Watchdog Timer
MAX16153 nanoPower Supervisor and Watchdog Timer
MAX16154 nanoPower Supervisor and Watchdog Timer
MAX16155 nanoPower Supervisor and Watchdog Timer
MAX16156 nanoPower Tiny Supervisor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Click here for production status of specific part numbers. MAX16150 nanoPower Pushbutton On/Off Controller and Battery Freshness Seal General Description The MAX16150A/MAX16150B are extremely low-power, pushbutton, on/off controllers with a switch debouncer and built-in latch. These devices accept a noisy input from a mechanical switch and produce a clean, latched output, as well as a one-shot interrupt output, in response to a switch closure exceeding the debounce period at PB_IN. The MAX16150A de-asserts the latched output when the switch closure period exceeds the shutdown period, while the MAX16150B does not de-assert the latched output in response to switch closure. For the MAX16150B, a longer switch closure results in a longer interrupt signal.
Published: |