Datasheet4U Logo Datasheet4U.com

MAX17710 - Energy-Harvesting Charger and Protector

General Description

The MAX17710 is a complete system for charging and protecting micropower-storage cells such as Infinite Power Solutions’ THINERGY® microenergy cells (MECs).

The IC can manage poorly regulated sources such as energyharvesting devices with output levels ranging from 1FW to 100mW.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1771 Step-Up DC-DC Controller Maxim
MAX177 CMOS 10-Bit A/D Converter Maxim
MAX1772 Low-Cost / Multichemistry Battery-Charger Building Block Maxim
MAX1773 Power Source Selector Maxim
MAX1774 Dual / High-Efficiency / Step-Down Converter Maxim

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX17701 Synchronous Step-Down Supercapacitor Charger Controller
MAX1773A Power Source Selector
MAX17761 Synchronous Step-Down DC-DC Converter
MAX17000 Complete DDR2 and DDR3 Memory Power-Management Solution
MAX17003 Main PowerSupply Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
EVALUATION KIT AVAILABLE MAX17710 Energy-Harvesting Charger and Protector General Description The MAX17710 is a complete system for charging and protecting micropower-storage cells such as Infinite Power Solutions’ THINERGY® microenergy cells (MECs). The IC can manage poorly regulated sources such as energyharvesting devices with output levels ranging from 1FW to 100mW. The device also includes a boost regulator circuit for charging the cell from a source as low as 0.75V (typ). An internal regulator protects the cell from overcharging. Output voltages supplied to the target applications are regulated using a low-dropout (LDO) linear regulator with selectable voltages of 3.3V, 2.3V, or 1.8V.